User manual

TD 92582EN
21 June 2012 / Ver. G
User Manual
Ascom d41 DECT Handset
35
Set the Key Sound
This means that every time a key is used, a low sound is heard.
1 Select “Key sound”.
2 Select “Silent, “Click”, or “Tone”.
3 Press "Back".
It is possible to listen to the key sound by pressing the "Play" soft key.
9.3.2 Select Headset Profile
1 Select "Headset".
2 Select "Mic on boom", "Mic on cable", or "Customized headset profile"
1
3 Press "Select".
9.3.3 Display Settings
1 Select “Display”.
2 Select “Contrast”.
3 Adjust the contrast by using the and on the navigation key.
4Press "OK".
5 Press "Back".
9.3.4 Time & Date Settings
The time and date are received from the DECT system. If the time and date are changed in
the system, it takes up to 24 hours before the changes appear in the handset. If the
handset is turned off and then turned on, the changes will be applied immediately.
However, it is possible to change the format of the time and date.
Set Time Format
1 Select "Time & Date"
2 Press "Select".
3 Select time format. The actual time format will be displayed. Selectable time
formats:
• hh:mm (am/pm) (for example: 1:00pm)
• hh:mm (for example 13:00)
4 Press "Select" to save the setting.
Set Date Format
1 Select “Time & Date”.
2 Press "Select".
3 Select “Date format”
1."Customized headset profile" is only visible if the headset profile has been configured in the PDM/IMS3.