User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Menu Tree
- 4 Basic Operation
- 5 Calling
- 5.1 Open the Call List
- 5.2 Incoming Call
- 5.3 Outgoing Call
- 5.3.1 Pre-Dial
- 5.3.2 Post-Dial with Headset Button
- 5.3.3 Dial Using a Pre-programmed Number
- 5.3.4 Dial a Number from the Call list
- 5.3.5 Dial Last Called Number with Headset Button
- 5.3.6 Dial the Sender of a Message
- 5.3.7 Dial a Number from Contacts
- 5.3.8 Dial a Name from the Central Phonebook
- 5.3.9 Dial a Number from the Company Phonebook
- 5.4 During a Call
- 5.4.1 Adjust the Volume during a Call
- 5.4.2 Open Contacts during the Call
- 5.4.3 Open Messaging Menu during a Call
- 5.4.4 Turn the Microphone On or Off during a Call
- 5.4.5 Lock and Unlock the Keypad during a Call
- 5.4.6 Audio Transfer
- 5.4.7 Start a New Call during Conversation
- 5.4.8 Switch between Calls
- 5.4.9 End a Call
- 5.4.10 Transfer a Call
- 5.4.11 Transfer to New Call
- 5.4.12 Conference Call
- 5.4.13 Call Back
- 5.4.14 Send Call Waiting
- 5.4.15 Answering Call Waiting
- 5.4.16 DTMF
- 5.4.17 DECT Info
- 5.4.18 Send Data
- 5.5 Loudspeaking Function
- 5.6 Call Diversion
- 5.7 Emergency Calls
- 6 Messaging
- 6.1 Mini Messaging
- 6.2 Message List
- 6.3 Receive a Message
- 6.3.1 Read a Stored Message
- 6.3.2 Reply to a Message
- 6.3.3 Delete Messages
- 6.3.4 Forward a Message
- 6.3.5 Call the Sender of the Message
- 6.3.6 Call a Number Included in a Message
- 6.3.7 Save Number
- 6.3.8 Message Templates
- 6.3.9 Write and Send a Message
- 6.3.10 Open a Sent Message
- 6.3.11 Send to Another Destination
- 6.3.12 Review Inbox Content while Reading a Message
- 6.4 Receive a Message with Request for Answer
- 6.5 Message Queuing and Message Priority
- 6.6 Message Priority and Call Priority
- 6.7 Interactive Messaging
- 6.8 Message Indication Repetition
- 6.9 Colored Messaging
- 6.10 Decline a Call with a Predefined Message
- 6.11 Answering a Text Message with a Predefined Message
- 6.12 Calling while Reading a Text Message
- 6.13 Mobile Data
- 6.14 Send Data with Bluetooth Barcode Reader
- 6.15 Voicemail
- 7 Alarm Operation
- 8 Menu Operation
- 9 Procedure Call
- 10 System Profiles
- 11 Advanced Functions
- 12 System Handling
- 13 Troubleshooting
- 14 Operation Notice
- 15 Maintenance
- 16 Related Documents
- 17 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477EN
31 October 2013 / Ver. J
User Manual
Ascom d62 DECT Handset
76
Unable to switch off
handset by long
pressing the On-hook
key.
Handset, with In
Charger >
Other
actions> Switch off
enabled, is not switched
off when placed in
charger.
A handset restriction preventing
the use
r to switch off the handset.
Disable the parameter Prevent
switch off, see Configuration
Manual, Ascom d62 DECT
Handset, TD 92639EN.
Unable to subscribe
handset using Easy
Registration feature.
1) The handset does not support
the Easy Registration feature.
2) The handset is subscribed to a
system.
3) The IP-DECT system (release
3.x.x and lower) does not support
Easy Registration.
4) The IP-DECT system (release
4.x and higher) is not configured
fo
r Easy Registration.
5) There is ambient equipment
disturbing your IP-DECT system.
1) Make sure that the
handset’s software is of
version 3.2.x or higher. In idle
more, press "*#34#" and
select "Software".
2) Unsubscribe the handset
and then subscribe it by
following the instructions in
Subscribe Handset in IP-DECT
System Manually on
page 47.
3) Subscribe the handset
manually, see Subscribe
Handset in IP-DECT System
Manually on
page 47.
4) Subscribe the handset
manually, see Subscribe
Handset in IP-DECT System
Manually on
page 47,
or
configure the system to
support Easy Registration,
see the applicable Installation
and Operation Manual for
your IP-DECT system.
5) Try to subscribe the
handset in other area in your
building.
6) If the problem still exists,
restart your handset and
subscribe the handset.
Fault Probable cause Action or comment