User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Menu Tree
- 4 Basic Operation
- 5 Calling
- 5.1 Open the Call List
- 5.2 Incoming Call
- 5.3 Outgoing Call
- 5.3.1 Pre-Dial
- 5.3.2 Post-Dial with Headset Button
- 5.3.3 Dial Using a Pre-programmed Number
- 5.3.4 Dial a Number from the Call list
- 5.3.5 Dial Last Called Number with Headset Button
- 5.3.6 Dial the Sender of a Message
- 5.3.7 Dial a Number from Contacts
- 5.3.8 Dial a Name from the Central Phonebook
- 5.3.9 Dial a Number from the Company Phonebook
- 5.4 During a Call
- 5.4.1 Adjust the Volume during a Call
- 5.4.2 Open Contacts during the Call
- 5.4.3 Open Messaging Menu during a Call
- 5.4.4 Turn the Microphone On or Off during a Call
- 5.4.5 Lock and Unlock the Keypad during a Call
- 5.4.6 Audio Transfer
- 5.4.7 Start a New Call during Conversation
- 5.4.8 Switch between Calls
- 5.4.9 End a Call
- 5.4.10 Transfer a Call
- 5.4.11 Transfer to New Call
- 5.4.12 Conference Call
- 5.4.13 Call Back
- 5.4.14 Send Call Waiting
- 5.4.15 Answering Call Waiting
- 5.4.16 DTMF
- 5.4.17 DECT Info
- 5.4.18 Send Data
- 5.5 Loudspeaking Function
- 5.6 Call Diversion
- 5.7 Emergency Calls
- 6 Messaging
- 6.1 Mini Messaging
- 6.2 Message List
- 6.3 Receive a Message
- 6.3.1 Read a Stored Message
- 6.3.2 Reply to a Message
- 6.3.3 Delete Messages
- 6.3.4 Forward a Message
- 6.3.5 Call the Sender of the Message
- 6.3.6 Call a Number Included in a Message
- 6.3.7 Save Number
- 6.3.8 Message Templates
- 6.3.9 Write and Send a Message
- 6.3.10 Open a Sent Message
- 6.3.11 Send to Another Destination
- 6.3.12 Review Inbox Content while Reading a Message
- 6.4 Receive a Message with Request for Answer
- 6.5 Message Queuing and Message Priority
- 6.6 Message Priority and Call Priority
- 6.7 Interactive Messaging
- 6.8 Message Indication Repetition
- 6.9 Colored Messaging
- 6.10 Decline a Call with a Predefined Message
- 6.11 Answering a Text Message with a Predefined Message
- 6.12 Calling while Reading a Text Message
- 6.13 Mobile Data
- 6.14 Send Data with Bluetooth Barcode Reader
- 6.15 Voicemail
- 7 Alarm Operation
- 8 Menu Operation
- 9 Procedure Call
- 10 System Profiles
- 11 Advanced Functions
- 12 System Handling
- 13 Troubleshooting
- 14 Operation Notice
- 15 Maintenance
- 16 Related Documents
- 17 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477EN
31 October 2013 / Ver. J
User Manual
Ascom d62 DECT Handset
66
Set the Key Sound
This means that every time a key is used, the handset gives a small sound.
1 Select “Key sound”. Choose between “
Silent, “Click”, or “Tone”.
2 Select key sound.
3 Press "Back".
To listen to the key sound, press the soft key "Play".
8.8.2 Keypad Lock Settings
The handset keypad can be locked automatically to m
inimize the risk of accidentally
pressing keys or buttons while the handset is not in use. The keypad is automatically locked
after a lock time parameter "Auto lock time" expires.
Note: The alarm b
utton can be pressed while the keypad is locked. Any one of five
predefined emergency numbers can also be called while the keypad is locked as long as this
feature has been configured in the PDM/Device Manager. For additional information, see the
Configuration Manual for the Ascom d62 DECT Handset.
The automatic key lock can be configured by the admi
nistrator in the PDM/Device Manager.
For additional information, see the Configuration Manual for the Ascom d62 DECT Handset.
The user m
ay also configure the automatic key lock as described in the following sections.
Automatic key lock: One of the follo
wing options may be configured:
"On": the keypad is automatically locked if it is not used before the specifie
d lock time
elapses.
"On, except calls": the keypad is automatically locke
d if it is not used for the specified lock
time. If the user is in call when the lock time elapses, the keypad remains unlocked until the
user has completed the call.
"Off": the keypad is never automa
tically locked.
Auto lock time: specifies the time that elapses before the keypad is au
tomatically locked.
The shortest time that may be specified before the key lock is applied is 5 seconds and the
longest time is 3 minutes.
Auto key unlock: the keypad is automatically unlocked when a call or message
is received.
When the user has serviced the call or message, the key lock is reapplied after the specified
automatic lock time expires.
Activate the Automatic Key Lock
The user activates the automatic key lock and sets the Auto lock t
ime from the handset
"Settings" menu in the following way:
1 Select “Locks”. The "Locks" menu is displayed.
2 Select "Automatic key lock" menu item and s
elect "On" or "On except calls".
NOTE: The current key lock setting is displa
yed under the "Automatic key lock" menu
item.
3 Press the "Back" soft key to redisplay the "Locks" menu.
4 Select "Auto lock time" and press the "Select"
soft key.
5 Select the required lock time and press the "Select" soft key.