User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Menu Tree
- 4 Basic Operation
- 5 Calling
- 5.1 Open the Call List
- 5.2 Incoming Call
- 5.3 Outgoing Call
- 5.3.1 Pre-Dial
- 5.3.2 Post-Dial with Headset Button
- 5.3.3 Dial Using a Pre-programmed Number
- 5.3.4 Dial a Number from the Call list
- 5.3.5 Dial Last Called Number with Headset Button
- 5.3.6 Dial the Sender of a Message
- 5.3.7 Dial a Number from Contacts
- 5.3.8 Dial a Name from the Central Phonebook
- 5.3.9 Dial a Number from the Company Phonebook
- 5.4 During a Call
- 5.4.1 Adjust the Volume during a Call
- 5.4.2 Open Contacts during the Call
- 5.4.3 Open Messaging Menu during a Call
- 5.4.4 Turn the Microphone On or Off during a Call
- 5.4.5 Lock and Unlock the Keypad during a Call
- 5.4.6 Audio Transfer
- 5.4.7 Start a New Call during Conversation
- 5.4.8 Switch between Calls
- 5.4.9 End a Call
- 5.4.10 Transfer a Call
- 5.4.11 Transfer to New Call
- 5.4.12 Conference Call
- 5.4.13 Call Back
- 5.4.14 Send Call Waiting
- 5.4.15 Answering Call Waiting
- 5.4.16 DTMF
- 5.4.17 DECT Info
- 5.4.18 Send Data
- 5.5 Loudspeaking Function
- 5.6 Call Diversion
- 5.7 Emergency Calls
- 6 Messaging
- 6.1 Mini Messaging
- 6.2 Message List
- 6.3 Receive a Message
- 6.3.1 Read a Stored Message
- 6.3.2 Reply to a Message
- 6.3.3 Delete Messages
- 6.3.4 Forward a Message
- 6.3.5 Call the Sender of the Message
- 6.3.6 Call a Number Included in a Message
- 6.3.7 Save Number
- 6.3.8 Message Templates
- 6.3.9 Write and Send a Message
- 6.3.10 Open a Sent Message
- 6.3.11 Send to Another Destination
- 6.3.12 Review Inbox Content while Reading a Message
- 6.4 Receive a Message with Request for Answer
- 6.5 Message Queuing and Message Priority
- 6.6 Message Priority and Call Priority
- 6.7 Interactive Messaging
- 6.8 Message Indication Repetition
- 6.9 Colored Messaging
- 6.10 Decline a Call with a Predefined Message
- 6.11 Answering a Text Message with a Predefined Message
- 6.12 Calling while Reading a Text Message
- 6.13 Mobile Data
- 6.14 Send Data with Bluetooth Barcode Reader
- 6.15 Voicemail
- 7 Alarm Operation
- 8 Menu Operation
- 9 Procedure Call
- 10 System Profiles
- 11 Advanced Functions
- 12 System Handling
- 13 Troubleshooting
- 14 Operation Notice
- 15 Maintenance
- 16 Related Documents
- 17 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477EN
31 October 2013 / Ver. J
User Manual
Ascom d62 DECT Handset
63
8.7.1 Call Contact
1 Select "Call contact".
2 Select contact from the list, or enter nam
e or number in the search field.
3 Press the Soft key "Call".
The contact can also be edited and a message sent
by selecting "View" > "More".
8.7.2 Add Contact
1 Select "Add contact".
Add New Contact
1 Select "New".
2 Select "Add", and enter the name of the contact.
3Press "OK".
4 Select "Work Number"/"Mobile number"/"Other number".
5 Press "Add".
6 Enter handset numbers.
Tip: A variable or the character U can be added to the Work/Mobile/O
ther number
field to allow the user to enter additional numerical characters before calling the
number. See 9 Procedure Call on
page 71 for more information.
7Press "OK".
8 Press "Save".
NOTE: A specific ring signal can be set for each contact, s
ee 8.7.3 Edit Contact on page 63
Add from Call List
1 Select "From call list".
2 Select number.
3 Press "Add".
4 Select number type.
5 Press "Select".
6 Press "Add", and enter name for the contact.
7Press "OK".
8 Press "Save".
NOTE: A specific ring signal can be set for each contact, s
ee 8.7.3 Edit Contact on page 63
8.7.3 Edit Contact
1 Select "Edit contact".
2 Select contact, and press "Edit" twice.
3 Enter new name/number, and press "OK".
Tip: A variable or the character U can be added to the Work/Mobile/O
ther number
field to allow the user to enter additional numerical characters before calling the
number. See 9 Procedure Call on
page 71 for more information.