User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Menu Tree
- 4 Basic Operation
- 5 Calling
- 5.1 Open the Call List
- 5.2 Incoming Call
- 5.3 Outgoing Call
- 5.3.1 Pre-Dial
- 5.3.2 Post-Dial with Headset Button
- 5.3.3 Dial Using a Pre-programmed Number
- 5.3.4 Dial a Number from the Call list
- 5.3.5 Dial Last Called Number with Headset Button
- 5.3.6 Dial the Sender of a Message
- 5.3.7 Dial a Number from Contacts
- 5.3.8 Dial a Name from the Central Phonebook
- 5.3.9 Dial a Number from the Company Phonebook
- 5.4 During a Call
- 5.4.1 Adjust the Volume during a Call
- 5.4.2 Open Contacts during the Call
- 5.4.3 Open Messaging Menu during a Call
- 5.4.4 Turn the Microphone On or Off during a Call
- 5.4.5 Lock and Unlock the Keypad during a Call
- 5.4.6 Audio Transfer
- 5.4.7 Start a New Call during Conversation
- 5.4.8 Switch between Calls
- 5.4.9 End a Call
- 5.4.10 Transfer a Call
- 5.4.11 Transfer to New Call
- 5.4.12 Conference Call
- 5.4.13 Call Back
- 5.4.14 Send Call Waiting
- 5.4.15 Answering Call Waiting
- 5.4.16 DTMF
- 5.4.17 DECT Info
- 5.4.18 Send Data
- 5.5 Loudspeaking Function
- 5.6 Call Diversion
- 5.7 Emergency Calls
- 6 Messaging
- 6.1 Mini Messaging
- 6.2 Message List
- 6.3 Receive a Message
- 6.3.1 Read a Stored Message
- 6.3.2 Reply to a Message
- 6.3.3 Delete Messages
- 6.3.4 Forward a Message
- 6.3.5 Call the Sender of the Message
- 6.3.6 Call a Number Included in a Message
- 6.3.7 Save Number
- 6.3.8 Message Templates
- 6.3.9 Write and Send a Message
- 6.3.10 Open a Sent Message
- 6.3.11 Send to Another Destination
- 6.3.12 Review Inbox Content while Reading a Message
- 6.4 Receive a Message with Request for Answer
- 6.5 Message Queuing and Message Priority
- 6.6 Message Priority and Call Priority
- 6.7 Interactive Messaging
- 6.8 Message Indication Repetition
- 6.9 Colored Messaging
- 6.10 Decline a Call with a Predefined Message
- 6.11 Answering a Text Message with a Predefined Message
- 6.12 Calling while Reading a Text Message
- 6.13 Mobile Data
- 6.14 Send Data with Bluetooth Barcode Reader
- 6.15 Voicemail
- 7 Alarm Operation
- 8 Menu Operation
- 9 Procedure Call
- 10 System Profiles
- 11 Advanced Functions
- 12 System Handling
- 13 Troubleshooting
- 14 Operation Notice
- 15 Maintenance
- 16 Related Documents
- 17 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477EN
31 October 2013 / Ver. J
User Manual
Ascom d62 DECT Handset
61
8.6 Profiles
An own profile can be set up for incoming calls, message alerts, message volume, vibrating
alerts, key sound etc. This can be useful when there are many users on the same handset
who require different sound profiles. It can also be used for temporarily settings, for
example while in a meeting incoming calls should be silent. A user can then switch to his or
her own particular profile when using the handset.
If no profile is selected, the normal settings are used.
Note: The settings in a profile can be supe
rseded if the corresp
onding settings in a system
profile
1
are activated. When the system profile is activated, its settings are not displayed in
the handset menu. However, they can be displayed when a syst
em profile is activated in the
handset. See 10 System Profiles on page 71
.
1 Enter the menu by pressing the “Menu” Soft key, o
r the confirmation button on the
Navigation key.
2 Select
in the menu.
Add New Profile
1 Enter the menu by pressing the “Menu” Soft key, o
r the confirmation button on the
Navigation key.
2 Select
in the menu.
3 Select "Add new".
4 Enter name of the profile.
5 Press "Save".
6 Press "More" and then select "Add setting".
7 Select the setting you want to add to the profile.
Repeat steps 6-7 if you want to add additional sett
in
gs.
8 Mark the wanted setting and press "Edit" to make the changes.
A new profile based on another profile can also be created in the following way:
1 Enter the menu by pressing the “Menu” Soft key, o
r the confirmation button on the
Navigation key.
2 Select
in the menu.
3 Select "Add new".
4 Enter name of the profile.
5 Press "Save"
6 Press "More" and then select "Import from".
7 Select the profile which settings to be use
d for the new profile.
8
If needed, press "More" and then select correspondin
g option to add/import
additional settings or remove settings.
Activate Profile
1 Enter the menu by pressing the “Menu” Soft ke
y, o
r the confirmation button on the
Navigation key.
1.This feature is applicable for d62 Messenger and d62 Protector only.