User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Menu Tree
- 4 Basic Operation
- 5 Calling
- 5.1 Open the Call List
- 5.2 Incoming Call
- 5.3 Outgoing Call
- 5.3.1 Pre-Dial
- 5.3.2 Post-Dial with Headset Button
- 5.3.3 Dial Using a Pre-programmed Number
- 5.3.4 Dial a Number from the Call list
- 5.3.5 Dial Last Called Number with Headset Button
- 5.3.6 Dial the Sender of a Message
- 5.3.7 Dial a Number from Contacts
- 5.3.8 Dial a Name from the Central Phonebook
- 5.3.9 Dial a Number from the Company Phonebook
- 5.4 During a Call
- 5.4.1 Adjust the Volume during a Call
- 5.4.2 Open Contacts during the Call
- 5.4.3 Open Messaging Menu during a Call
- 5.4.4 Turn the Microphone On or Off during a Call
- 5.4.5 Lock and Unlock the Keypad during a Call
- 5.4.6 Audio Transfer
- 5.4.7 Start a New Call during Conversation
- 5.4.8 Switch between Calls
- 5.4.9 End a Call
- 5.4.10 Transfer a Call
- 5.4.11 Transfer to New Call
- 5.4.12 Conference Call
- 5.4.13 Call Back
- 5.4.14 Send Call Waiting
- 5.4.15 Answering Call Waiting
- 5.4.16 DTMF
- 5.4.17 DECT Info
- 5.4.18 Send Data
- 5.5 Loudspeaking Function
- 5.6 Call Diversion
- 5.7 Emergency Calls
- 6 Messaging
- 6.1 Mini Messaging
- 6.2 Message List
- 6.3 Receive a Message
- 6.3.1 Read a Stored Message
- 6.3.2 Reply to a Message
- 6.3.3 Delete Messages
- 6.3.4 Forward a Message
- 6.3.5 Call the Sender of the Message
- 6.3.6 Call a Number Included in a Message
- 6.3.7 Save Number
- 6.3.8 Message Templates
- 6.3.9 Write and Send a Message
- 6.3.10 Open a Sent Message
- 6.3.11 Send to Another Destination
- 6.3.12 Review Inbox Content while Reading a Message
- 6.4 Receive a Message with Request for Answer
- 6.5 Message Queuing and Message Priority
- 6.6 Message Priority and Call Priority
- 6.7 Interactive Messaging
- 6.8 Message Indication Repetition
- 6.9 Colored Messaging
- 6.10 Decline a Call with a Predefined Message
- 6.11 Answering a Text Message with a Predefined Message
- 6.12 Calling while Reading a Text Message
- 6.13 Mobile Data
- 6.14 Send Data with Bluetooth Barcode Reader
- 6.15 Voicemail
- 7 Alarm Operation
- 8 Menu Operation
- 9 Procedure Call
- 10 System Profiles
- 11 Advanced Functions
- 12 System Handling
- 13 Troubleshooting
- 14 Operation Notice
- 15 Maintenance
- 16 Related Documents
- 17 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477EN
31 October 2013 / Ver. J
User Manual
Ascom d62 DECT Handset
56
Divert Calls When Busy
1 Select "When busy".
2 Select "Activate".
3 Enter number (maximum 24 digits) to divert to, or press the soft key
to open
the phonebook.
4Press "OK"
The handset sends a diversion reason code
1
to the system by establishing a call. The call is
automatically disconnected after a few seconds.
To stop diversion select "Deactivate"
and press the confirmation button or the Soft key "OK".
8.3 Shortcuts
Predefined functions can be set as shortcuts for the Soft keys, Hot keys, Navigation keys,
and the Multifunction button. For example, a soft key can be set to make a call, as a shortcut
to send a message or to a menu.
Tip: If creating a shortcut to the Pho
ne call function, a variable or character U in the Enter
number field can be added that lets the user enter additional numerical characters before
calling the number. See 9 Procedure Call on pa
ge 71 for more information.
1 Enter the menu by pressing the “Menu” Soft key, o
r the confirmation button on the
Navigation key.
2 Select
in the menu, and press the confirmation button or the Soft key "Select".
8.3.1 Define Soft Keys
1 Select "Soft keys".
2 Select "Left", "Middle", or "Right".
3 Press "Select" to enter a name for the Soft key.
4Press "OK".
5 Select "Function", and press "Select" to select function for th
e Soft key.
6
Select function from list, and press "Back".
7
Select "Value" (only for some of the functions), and press "Select". Enter a value for
e
xample a handset number. Press "Back".
8 Select "Control question", and press "Select". It is off by default.
Press "Back".
9 Press "Save".
8.3.2 Define Hot Keys
1 Select "Hot keys".
2 Select "0", "2" to "9".
3 Select "Function", and press "Select" to select function for th
e Soft key.
4
Select function from list, and press "Back".
5
Select "Value" (only for some of the functions), and press "Select". Enter a value for
e
xample a handset number. Press "Back".
6 Select "Control question", and press "Sel
ect". It is off by default.
7 Press "Save"