User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Menu Tree
- 4 Basic Operation
- 5 Calling
- 5.1 Open the Call List
- 5.2 Incoming Call
- 5.3 Outgoing Call
- 5.3.1 Pre-Dial
- 5.3.2 Post-Dial with Headset Button
- 5.3.3 Dial Using a Pre-programmed Number
- 5.3.4 Dial a Number from the Call list
- 5.3.5 Dial Last Called Number with Headset Button
- 5.3.6 Dial the Sender of a Message
- 5.3.7 Dial a Number from Contacts
- 5.3.8 Dial a Name from the Central Phonebook
- 5.3.9 Dial a Number from the Company Phonebook
- 5.4 During a Call
- 5.4.1 Adjust the Volume during a Call
- 5.4.2 Open Contacts during the Call
- 5.4.3 Open Messaging Menu during a Call
- 5.4.4 Turn the Microphone On or Off during a Call
- 5.4.5 Lock and Unlock the Keypad during a Call
- 5.4.6 Audio Transfer
- 5.4.7 Start a New Call during Conversation
- 5.4.8 Switch between Calls
- 5.4.9 End a Call
- 5.4.10 Transfer a Call
- 5.4.11 Transfer to New Call
- 5.4.12 Conference Call
- 5.4.13 Call Back
- 5.4.14 Send Call Waiting
- 5.4.15 Answering Call Waiting
- 5.4.16 DTMF
- 5.4.17 DECT Info
- 5.4.18 Send Data
- 5.5 Loudspeaking Function
- 5.6 Call Diversion
- 5.7 Emergency Calls
- 6 Messaging
- 6.1 Mini Messaging
- 6.2 Message List
- 6.3 Receive a Message
- 6.3.1 Read a Stored Message
- 6.3.2 Reply to a Message
- 6.3.3 Delete Messages
- 6.3.4 Forward a Message
- 6.3.5 Call the Sender of the Message
- 6.3.6 Call a Number Included in a Message
- 6.3.7 Save Number
- 6.3.8 Message Templates
- 6.3.9 Write and Send a Message
- 6.3.10 Open a Sent Message
- 6.3.11 Send to Another Destination
- 6.3.12 Review Inbox Content while Reading a Message
- 6.4 Receive a Message with Request for Answer
- 6.5 Message Queuing and Message Priority
- 6.6 Message Priority and Call Priority
- 6.7 Interactive Messaging
- 6.8 Message Indication Repetition
- 6.9 Colored Messaging
- 6.10 Decline a Call with a Predefined Message
- 6.11 Answering a Text Message with a Predefined Message
- 6.12 Calling while Reading a Text Message
- 6.13 Mobile Data
- 6.14 Send Data with Bluetooth Barcode Reader
- 6.15 Voicemail
- 7 Alarm Operation
- 8 Menu Operation
- 9 Procedure Call
- 10 System Profiles
- 11 Advanced Functions
- 12 System Handling
- 13 Troubleshooting
- 14 Operation Notice
- 15 Maintenance
- 16 Related Documents
- 17 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477EN
31 October 2013 / Ver. J
User Manual
Ascom d62 DECT Handset
47
• The IP-DECT system is configured for Easy Registration, see the corresponding
Installation and Operation manual for the IP-DECT system.
• The handset’s IPEI is registered in the IP-DEC
T system, see the corresponding Installation
and Operation manual for the IP-DECT system.
• The handset is not subscribed to any systems.
• The handset software is 3.2.x or greater.
1 If needed, switch off the handset by pressing
.
2 Switch on the handset by pressing
.
3 Select language to be used or press "Cancel". If Cancel is pressed, the defa
ult
language English is used.
4 The handset starts to search for IP-DECT systems. When a system is found the
handset subscr
ibes to it.
NOTE: If no system is found within 2 minutes or "Can
cel" is pressed, the handset returns to
the System menu. If this is the case, continue with Subscribe Handset in IP-DECT System
Manually.
Subscribe Handset in IP-DECT System Manually
To subscribe an IP-DECT system manually, the “Park:
”
(Portable Access Right Key) and “Ac:”
(Authentication code) related to the system are needed. Contact the system administrator
for more information. If the handset has been subscribed in one system, additional systems
have to be subscribed manually.
NOTE: The PARK code may not be needed if there is no alien DECT system within the
coverage ar
ea.
T
he IPDI code is a unique code which has been assigned to the handset, see also 11.1 Admin
Menu on
page 73.
1
Select "System".
2 Select "Subscribe".
3 Press "Next".
4 Enter System name (optional). If no system
nam
e is entered, the default name is
used. That is System A, System B etc. depending on which system name that is free.
5 Press "Next".
6 Enter PARK code (max. 31 digits). The PARK code may not b
e neede
d if there is no
alien DECT system within the coverage area.
7 Enter AC code. The AC code length must be between 4 - 8 digits.
8 Press "Next".
9 An information text "Protection on?" is
displayed.
Select "Yes" if the new system is to
be protected. A protected subscription cannot be deleted from the System meny
1
.
10 Press "OK". A searching mode starts.
Unsubscribe System
1 Enter the menu by pressing the “Menu” soft key.
1.A protected system cannot be unsubscribed via the System menu. The unsubscribtion must be made via the Admin menu
or the DECT system.