User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Menu Tree
- 4 Basic Operation
- 5 Calling
- 5.1 Open the Call List
- 5.2 Incoming Call
- 5.3 Outgoing Call
- 5.3.1 Pre-Dial
- 5.3.2 Post-Dial with Headset Button
- 5.3.3 Dial Using a Pre-programmed Number
- 5.3.4 Dial a Number from the Call list
- 5.3.5 Dial Last Called Number with Headset Button
- 5.3.6 Dial the Sender of a Message
- 5.3.7 Dial a Number from Contacts
- 5.3.8 Dial a Name from the Central Phonebook
- 5.3.9 Dial a Number from the Company Phonebook
- 5.4 During a Call
- 5.4.1 Adjust the Volume during a Call
- 5.4.2 Open Contacts during the Call
- 5.4.3 Open Messaging Menu during a Call
- 5.4.4 Turn the Microphone On or Off during a Call
- 5.4.5 Lock and Unlock the Keypad during a Call
- 5.4.6 Audio Transfer
- 5.4.7 Start a New Call during Conversation
- 5.4.8 Switch between Calls
- 5.4.9 End a Call
- 5.4.10 Transfer a Call
- 5.4.11 Transfer to New Call
- 5.4.12 Conference Call
- 5.4.13 Call Back
- 5.4.14 Send Call Waiting
- 5.4.15 Answering Call Waiting
- 5.4.16 DTMF
- 5.4.17 DECT Info
- 5.4.18 Send Data
- 5.5 Loudspeaking Function
- 5.6 Call Diversion
- 5.7 Emergency Calls
- 6 Messaging
- 6.1 Mini Messaging
- 6.2 Message List
- 6.3 Receive a Message
- 6.3.1 Read a Stored Message
- 6.3.2 Reply to a Message
- 6.3.3 Delete Messages
- 6.3.4 Forward a Message
- 6.3.5 Call the Sender of the Message
- 6.3.6 Call a Number Included in a Message
- 6.3.7 Save Number
- 6.3.8 Message Templates
- 6.3.9 Write and Send a Message
- 6.3.10 Open a Sent Message
- 6.3.11 Send to Another Destination
- 6.3.12 Review Inbox Content while Reading a Message
- 6.4 Receive a Message with Request for Answer
- 6.5 Message Queuing and Message Priority
- 6.6 Message Priority and Call Priority
- 6.7 Interactive Messaging
- 6.8 Message Indication Repetition
- 6.9 Colored Messaging
- 6.10 Decline a Call with a Predefined Message
- 6.11 Answering a Text Message with a Predefined Message
- 6.12 Calling while Reading a Text Message
- 6.13 Mobile Data
- 6.14 Send Data with Bluetooth Barcode Reader
- 6.15 Voicemail
- 7 Alarm Operation
- 8 Menu Operation
- 9 Procedure Call
- 10 System Profiles
- 11 Advanced Functions
- 12 System Handling
- 13 Troubleshooting
- 14 Operation Notice
- 15 Maintenance
- 16 Related Documents
- 17 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477EN
31 October 2013 / Ver. J
User Manual
Ascom d62 DECT Handset
40
6.12 Calling while Reading a Text Message
A user can make a call while reading a text message to review and discuss the message with
the called party. The called party may be either:
• The message sender, that is, the same party that sent the text message
• A different party.
The user can activate the loudspeaker function during th
e call to make it easier to read the
received text message while talking to the called party.
6.12.1 Calling the Message Sender
To call the message sender while reading and reviewing a rece
ived text message, perform
the following steps:
1 Receive the text message and call the m
essage sender as described in Call Sender on
page 59.
2 Wait for the called party to repl
y. The message is replaced by the ongoing call details.
The user may now:
• Continue with the call without referring
back to the received message.
• Redisplay the message and co
ntinue the call to further review and discuss the
message. See Redisplay the Message and Continue with the Call on
page 40.
• Redisplay the message and terminate the call. See Redisplay the Message and
Terminate the Call on
page 41.
6.12.2 Calling a Different Party
To call another party to read and review a received text mess
age, perform the following
steps:
1 Open the message as described in 8.5 Messaging on
page 58 and press the "More"
soft key.
2 From the pop-up menu, navigate to the "Call" menu item and press the "
Select" soft
key. The pre-dial screen is displayed. Enter the number of the party to be called or
select a number from the handset call list or local or central phone books.
3 Press the "Call" soft key and wait for the called party to reply.
The message is
replaced by the ongoing call detail. The user may now:
• Continue with the call without referring
back to the received message.
• Redisplay the message and co
ntinue the call to further review and discuss the
message. See Redisplay the Message and Continue with the Call on
page 40.
• Redisplay the message and terminate the call. See Redisplay the Message and
Terminate the Call on
page 41.
Redisplay the Message and Continue with the Call
1 To redisplay the message while the call is ongoing, select the "More" soft key.
2 From the pop-up menu, select "Messaging".
3 From the Messaging menu, select "Inbox". The received message summary is
displaye
d.
4 Press the "View" soft key to display the message
in full. If required, use the four-way
navigation key to scroll up and down a long text message to reveal the content while
reviewing and discussing the message with the called party.