User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Menu Tree
- 4 Basic Operation
- 5 Calling
- 5.1 Open the Call List
- 5.2 Incoming Call
- 5.3 Outgoing Call
- 5.3.1 Pre-Dial
- 5.3.2 Post-Dial with Headset Button
- 5.3.3 Dial Using a Pre-programmed Number
- 5.3.4 Dial a Number from the Call list
- 5.3.5 Dial Last Called Number with Headset Button
- 5.3.6 Dial the Sender of a Message
- 5.3.7 Dial a Number from Contacts
- 5.3.8 Dial a Name from the Central Phonebook
- 5.3.9 Dial a Number from the Company Phonebook
- 5.4 During a Call
- 5.4.1 Adjust the Volume during a Call
- 5.4.2 Open Contacts during the Call
- 5.4.3 Open Messaging Menu during a Call
- 5.4.4 Turn the Microphone On or Off during a Call
- 5.4.5 Lock and Unlock the Keypad during a Call
- 5.4.6 Audio Transfer
- 5.4.7 Start a New Call during Conversation
- 5.4.8 Switch between Calls
- 5.4.9 End a Call
- 5.4.10 Transfer a Call
- 5.4.11 Transfer to New Call
- 5.4.12 Conference Call
- 5.4.13 Call Back
- 5.4.14 Send Call Waiting
- 5.4.15 Answering Call Waiting
- 5.4.16 DTMF
- 5.4.17 DECT Info
- 5.4.18 Send Data
- 5.5 Loudspeaking Function
- 5.6 Call Diversion
- 5.7 Emergency Calls
- 6 Messaging
- 6.1 Mini Messaging
- 6.2 Message List
- 6.3 Receive a Message
- 6.3.1 Read a Stored Message
- 6.3.2 Reply to a Message
- 6.3.3 Delete Messages
- 6.3.4 Forward a Message
- 6.3.5 Call the Sender of the Message
- 6.3.6 Call a Number Included in a Message
- 6.3.7 Save Number
- 6.3.8 Message Templates
- 6.3.9 Write and Send a Message
- 6.3.10 Open a Sent Message
- 6.3.11 Send to Another Destination
- 6.3.12 Review Inbox Content while Reading a Message
- 6.4 Receive a Message with Request for Answer
- 6.5 Message Queuing and Message Priority
- 6.6 Message Priority and Call Priority
- 6.7 Interactive Messaging
- 6.8 Message Indication Repetition
- 6.9 Colored Messaging
- 6.10 Decline a Call with a Predefined Message
- 6.11 Answering a Text Message with a Predefined Message
- 6.12 Calling while Reading a Text Message
- 6.13 Mobile Data
- 6.14 Send Data with Bluetooth Barcode Reader
- 6.15 Voicemail
- 7 Alarm Operation
- 8 Menu Operation
- 9 Procedure Call
- 10 System Profiles
- 11 Advanced Functions
- 12 System Handling
- 13 Troubleshooting
- 14 Operation Notice
- 15 Maintenance
- 16 Related Documents
- 17 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477EN
31 October 2013 / Ver. J
User Manual
Ascom d62 DECT Handset
29
5.4.11 Transfer to New Call
An ongoing call can be transferred to a new number. When th
e new call is established, the
caller that initiated the transfer is disconnected.
1 Press the soft key "More" during the call.
2 Select "Transf. to new"
1
.
3 Press "Select".
4 Enter the number of the person where the ongo
ing call is to be transferred or
press
to access the phonebook.
5Press
to transfer the call. Your call is disconnected automatically.
5.4.12 Conference Call
Prerequisite,
a new call has been started during conversation, see 5.4.7 Start a New Call
during Conversation on pa
ge 28.
By initiate a conference call, an conversation can be ma
de between several participants
simultaneously.
1 Press the soft key "More".
2 Select "Conference"
2
.
3 Press "Select".
The person initiating the conference call is the conference leader, and the other are
participant members of t
he conference call.
5.4.13 Call Back
When a call is made to a busy handset, an automaticall
y call back can be made when the
busy handset is free. When a busy tone sounds, do as follows:
1 Press the soft key "More" during the call.
2 Select "Call back"
1
.
3 Press "Select".
4Press
and wait until the handset alerts.
5 When the handset alerts, press
. The call is started automatically.
5.4.14 Send Call Waiting
This function is used when a callin
g party receives a busy signal from a party engaged in a
call and wishes to notify the party that another call is waiting. To notify the engaged party:
1 Press the soft key "More".
2 Select "Call waiting"
.
3 Press "Select". The engaged party receives a "Call waiting" signal.
When the line is free it automatically calls the number again. This is system dependent.
Note: The "Call waiting" function is only visible if an adm
inistrator has activated it in the
handset. For additional information, see the Configuration Manual.
1.Only visible when the parameters "New call" and "Transfer" are defined in the handset. See the Configuration Manual for
more information.
2.Visible if configured in the handset, see the Configuration Manual for more information.