User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Menu Tree
- 4 Basic Operation
- 5 Calling
- 5.1 Open the Call List
- 5.2 Incoming Call
- 5.3 Outgoing Call
- 5.3.1 Pre-Dial
- 5.3.2 Post-Dial with Headset Button
- 5.3.3 Dial Using a Pre-programmed Number
- 5.3.4 Dial a Number from the Call list
- 5.3.5 Dial Last Called Number with Headset Button
- 5.3.6 Dial the Sender of a Message
- 5.3.7 Dial a Number from Contacts
- 5.3.8 Dial a Name from the Central Phonebook
- 5.3.9 Dial a Number from the Company Phonebook
- 5.4 During a Call
- 5.4.1 Adjust the Volume during a Call
- 5.4.2 Open Contacts during the Call
- 5.4.3 Open Messaging Menu during a Call
- 5.4.4 Turn the Microphone On or Off during a Call
- 5.4.5 Lock and Unlock the Keypad during a Call
- 5.4.6 Audio Transfer
- 5.4.7 Start a New Call during Conversation
- 5.4.8 Switch between Calls
- 5.4.9 End a Call
- 5.4.10 Transfer a Call
- 5.4.11 Transfer to New Call
- 5.4.12 Conference Call
- 5.4.13 Call Back
- 5.4.14 Send Call Waiting
- 5.4.15 Answering Call Waiting
- 5.4.16 DTMF
- 5.4.17 DECT Info
- 5.4.18 Send Data
- 5.5 Loudspeaking Function
- 5.6 Call Diversion
- 5.7 Emergency Calls
- 6 Messaging
- 6.1 Mini Messaging
- 6.2 Message List
- 6.3 Receive a Message
- 6.3.1 Read a Stored Message
- 6.3.2 Reply to a Message
- 6.3.3 Delete Messages
- 6.3.4 Forward a Message
- 6.3.5 Call the Sender of the Message
- 6.3.6 Call a Number Included in a Message
- 6.3.7 Save Number
- 6.3.8 Message Templates
- 6.3.9 Write and Send a Message
- 6.3.10 Open a Sent Message
- 6.3.11 Send to Another Destination
- 6.3.12 Review Inbox Content while Reading a Message
- 6.4 Receive a Message with Request for Answer
- 6.5 Message Queuing and Message Priority
- 6.6 Message Priority and Call Priority
- 6.7 Interactive Messaging
- 6.8 Message Indication Repetition
- 6.9 Colored Messaging
- 6.10 Decline a Call with a Predefined Message
- 6.11 Answering a Text Message with a Predefined Message
- 6.12 Calling while Reading a Text Message
- 6.13 Mobile Data
- 6.14 Send Data with Bluetooth Barcode Reader
- 6.15 Voicemail
- 7 Alarm Operation
- 8 Menu Operation
- 9 Procedure Call
- 10 System Profiles
- 11 Advanced Functions
- 12 System Handling
- 13 Troubleshooting
- 14 Operation Notice
- 15 Maintenance
- 16 Related Documents
- 17 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477EN
31 October 2013 / Ver. J
User Manual
Ascom d62 DECT Handset
24
5 Calling
5.1 Open the Call List
1 Press "Menu’,
2 Select "Calls"
.
3 Select "Call list".
4 Select a number.
5Press
or the soft key "Call" to dial. The number can be edited before the call is
dialled. Press "More" and select "Edit number".
The 25 last received, dialled or missed
calls are stored in a call list. See 3.1 Calls on page 14
.
5.2 Incoming Call
The flashing LED, accompanied by a ring signal or vibrating handset or both, indicates an
incoming call. The ring signal and vibrator can be disabled. The calling party handset number
or name is displayed. The name is displayed if the calling party handset number is stored in
the local phonebook. To answer the call, press the Off-hook key.
Tip: Whe
n a headset is connected to the handset, the headset button can be used to answer
the call. In addition,
the headset button can be configured with a specific function, such as
post-dial, dial last called number, or dial a predefined number. See Configuration Manual,
Ascom d62 DECT Handset, TD 92639EN for more information.
Other answering methods can also be set in the Settings menu, see 3.8 Settings on pag
e 19.
The answering methods are; Automa
tically and Loudspeaking.
When “Automatically” is enabled, all incoming call
s are connected automatically.
5.2.1 Answer a Call
When the signal sounds press
or the "Accept" soft key to answer the call. The call can
be answered in loudspeaking mode by pressing the
soft key. The name or number of
the calling party is displayed if calling line in
formation is available.
5.2.2 Decline a Call
When the signal sounds, pres
s or the "Decline" soft key to answer the call.
NOTE: If the handset is configured to
respond to declined calls with a message template, the
"Reply with a message template?" prompt is displayed. For additional information, see 6.10
Decline a Call with a Predefined Message on pa
ge 39.
5.2.3 End a Call
Press
to end the call. The duration of the call is shown in the display. The total time of
the call can also be retrieved from the Calls menu >
Call time.
NOTE: Some systems/PBXs require that the handset sends a DTMF in order to end a call
. See
the handset’s Configuration Manual for more information. This feature is not applicable for
d62 Talker.