User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Menu Tree
- 4 Basic Operation
- 5 Calling
- 5.1 Open the Call List
- 5.2 Incoming Call
- 5.3 Outgoing Call
- 5.3.1 Pre-Dial
- 5.3.2 Post-Dial with Headset Button
- 5.3.3 Dial Using a Pre-programmed Number
- 5.3.4 Dial a Number from the Call list
- 5.3.5 Dial Last Called Number with Headset Button
- 5.3.6 Dial the Sender of a Message
- 5.3.7 Dial a Number from Contacts
- 5.3.8 Dial a Name from the Central Phonebook
- 5.3.9 Dial a Number from the Company Phonebook
- 5.4 During a Call
- 5.4.1 Adjust the Volume during a Call
- 5.4.2 Open Contacts during the Call
- 5.4.3 Open Messaging Menu during a Call
- 5.4.4 Turn the Microphone On or Off during a Call
- 5.4.5 Lock and Unlock the Keypad during a Call
- 5.4.6 Audio Transfer
- 5.4.7 Start a New Call during Conversation
- 5.4.8 Switch between Calls
- 5.4.9 End a Call
- 5.4.10 Transfer a Call
- 5.4.11 Transfer to New Call
- 5.4.12 Conference Call
- 5.4.13 Call Back
- 5.4.14 Send Call Waiting
- 5.4.15 Answering Call Waiting
- 5.4.16 DTMF
- 5.4.17 DECT Info
- 5.4.18 Send Data
- 5.5 Loudspeaking Function
- 5.6 Call Diversion
- 5.7 Emergency Calls
- 6 Messaging
- 6.1 Mini Messaging
- 6.2 Message List
- 6.3 Receive a Message
- 6.3.1 Read a Stored Message
- 6.3.2 Reply to a Message
- 6.3.3 Delete Messages
- 6.3.4 Forward a Message
- 6.3.5 Call the Sender of the Message
- 6.3.6 Call a Number Included in a Message
- 6.3.7 Save Number
- 6.3.8 Message Templates
- 6.3.9 Write and Send a Message
- 6.3.10 Open a Sent Message
- 6.3.11 Send to Another Destination
- 6.3.12 Review Inbox Content while Reading a Message
- 6.4 Receive a Message with Request for Answer
- 6.5 Message Queuing and Message Priority
- 6.6 Message Priority and Call Priority
- 6.7 Interactive Messaging
- 6.8 Message Indication Repetition
- 6.9 Colored Messaging
- 6.10 Decline a Call with a Predefined Message
- 6.11 Answering a Text Message with a Predefined Message
- 6.12 Calling while Reading a Text Message
- 6.13 Mobile Data
- 6.14 Send Data with Bluetooth Barcode Reader
- 6.15 Voicemail
- 7 Alarm Operation
- 8 Menu Operation
- 9 Procedure Call
- 10 System Profiles
- 11 Advanced Functions
- 12 System Handling
- 13 Troubleshooting
- 14 Operation Notice
- 15 Maintenance
- 16 Related Documents
- 17 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477EN
31 October 2013 / Ver. J
User Manual
Ascom d62 DECT Handset
96
Appendix B: Bluetooth Barcode Reader
B.1 Introduction
If the handset’s hardware supports Bluetooth (a icon is printed on the label under the
battery lid), a Bluetooth barcode reader can be used.
Note: The Bluetooth barcode reader requires that the license d
ependent Bluetooth Data
Profile feature is enabled. See Configuration Manual, Ascom d62 DECT Handset, 92639GB.
Bluetooth supported functions:
• Pair the handset with it’s Bluetooth barcode reader
• Choose which device to use when scanning barcodes
• Scan barcode(s) and send the info
rmation to a handset/system
B.2 Icon
See 2.3 Icons and Text in the Display on page 7.
B.3 Bluetooth Barcode Readers
A number of Bluetooth barcode readers for different work situations have been tested
together with the handset. Refer to the Ascom Wireless Extranet Website for a list of
verified Bluetooth barcode readers.
Since the Bluetooth supports the Bluetooth 2.0 standard, other Bluetooth barc
ode reader
may also work although not verified by Ascom.
Note: The Bluetooth barcode reader may h
ave more or less functions than described here,
refer to the Manual for the Bluetooth barcode reader.
B.4 Operation
Step between the menus with the navigation key . Confirm each menu selection by
pressing the Soft key "Select".
B.4.1 Enable Bluetooth
To enable the Bluetooth function enter
in the handset menu, select Bluetooth and
select “Enable”.
B.4.2 Pair and Connect a Bluetooth Barcode Reader
Before a barcode reader can be used
a connection (pairing) between the barcode reader and
the handset must be established.
1 Place the Bluetooth barcode reader and the handset next to each other.
2 Enable Bluetooth, see A.5.1 Enable Bluetooth.
3 Put the Bluetooth barcode reader in pairing mo
de, see the user manual for the
Bluetooth barcode reader.
4 On the handset enter
in the menu, select “Bluetooth” > “Barcode reader”, “Add
new”. A dialog "Put barcode reader in
pairing mode" is displayed.
5 Press "OK". It now searches for a Bluetooth barcode reader for connection.