User`s guide
Table Of Contents
- Ascend Customer Service
- How to use this guide
- What you should know
- Documentation conventions
- How to use the on-board software
- Manual set
- Configuring WAN Connections
- Configuring IP Routing
- Introduction to IP routing on the Pipeline
- Managing the routing table
- Parameters that affect the routing table
- Static and dynamic routes
- Configuring static routes
- Specifying default routes on a per-user basis
- Enabling the Pipeline to use dynamic routing
- Route preferences
- Viewing the routing table
- Fields in the routing table
- Removing down routes to a host
- Identifying Temporary routes in the routing table
- Configuring IP routing connections
- Ascend Tunnel Management Protocol (ATMP)
- IP Address Management
- Connecting to a local IP network
- BOOTP Relay
- DHCP services
- Dial-in user DNS server assignments
- Local DNS host address table
- Network Address Translation (NAT) for a LAN
- Configuring IPX Routing
- How the Pipeline performs IPX routing
- Adding the Pipeline to the local IPX network
- Working with the RIP and SAP tables
- Configuring IPX routing connections
- Configuring the Pipeline as a Bridge
- Defining Filters and Firewalls
- Setting Up Pipeline Security
- Pipeline System Administration
- Pipeline 75 Voice Features
- IDSL Implementations
- APP Server utility
- About the APP Server utility
- APP Server installation and setup
- Configuring the Pipeline to use the APP server
- Using App Server with Axent SecureNet
- Creating banner text for the password prompt
- Installing and using the UNIX APP Server
- Installing and using the APP Server utility for DO...
- Installing and using the APP Server utility for Wi...
- Installing APP Server on a Macintosh
- Troubleshooting
- Upgrading system software
- What you need to upgrade system software
- Displaying the software load name
- The upgrade procedure
- Untitled
Contents
viii Preliminary January 30, 1998 Pipeline User’s Guide
Single-address NAT and port routing ................................................ 3-23
Outgoing connection address translation ..................................... 3-23
Incoming connection address translation ..................................... 3-24
Translation table size ................................................................... 3-24
Multiple-address NAT ........................................................................ 3-25
Configuring single or multiple address NAT ..................................... 3-26
NAT for Frame Relay ........................................................................ 3-28
Configuring NAT port routing (Static Mapping submenu) ............... 3-29
Routing all incoming sessions to the default server ..................... 3-29
Routing incoming sessions for up to 10 servers on a LAN ......... 3-30
Disabling routing for specific ports ............................................. 3-32
Well-known ports ......................................................................... 3-32
Configuring IPX Routing .......................................... 4-1
How the Pipeline performs IPX routing ...................................................... 4-1
IPX Service Advertising Protocol (SAP) tables ................................... 4-2
IPX Routing Information Protocol (RIP) tables ................................... 4-3
Extensions to standard IPX .................................................................. 4-3
Virtual IPX network for dial-in clients .......................................... 4-4
Optimized access for dial-in NetWare clients ................................ 4-4
IPX Route profiles ......................................................................... 4-6
IPX SAP filters ............................................................................... 4-7
Dial Query ...................................................................................... 4-8
Watchdog spoofing ........................................................................ 4-9
Automatic SPX spoofing ............................................................... 4-9
WAN considerations for NetWare client software ............................ 4-10
IPX in the Answer profile .................................................................. 4-11
Adding the Pipeline to the local IPX network ........................................... 4-12
Checking local NetWare configurations ............................................ 4-12
Configuring IPX on the Pipeline Ethernet interface .......................... 4-13
Using IPXping to check the configuration ......................................... 4-14
Defining a virtual IPX network for dial-in clients ............................. 4-15
Working with the RIP and SAP tables ...................................................... 4-15
Viewing the RIP and SAP tables ........................................................ 4-16
Configuring RIP in a Connection profile ........................................... 4-17
Configuring a static IPX route ........................................................... 4-18
Configuring SAP in a Connection profile .......................................... 4-20
Managing IPX SAP filters .................................................................. 4-21
Defining an IPX SAP filter .......................................................... 4-21