User`s guide
Table Of Contents
- Ascend Customer Service
- How to use this guide
- What you should know
- Documentation conventions
- How to use the on-board software
- Manual set
- Configuring WAN Connections
- Configuring IP Routing
- Introduction to IP routing on the Pipeline
- Managing the routing table
- Parameters that affect the routing table
- Static and dynamic routes
- Configuring static routes
- Specifying default routes on a per-user basis
- Enabling the Pipeline to use dynamic routing
- Route preferences
- Viewing the routing table
- Fields in the routing table
- Removing down routes to a host
- Identifying Temporary routes in the routing table
- Configuring IP routing connections
- Ascend Tunnel Management Protocol (ATMP)
- IP Address Management
- Connecting to a local IP network
- BOOTP Relay
- DHCP services
- Dial-in user DNS server assignments
- Local DNS host address table
- Network Address Translation (NAT) for a LAN
- Configuring IPX Routing
- How the Pipeline performs IPX routing
- Adding the Pipeline to the local IPX network
- Working with the RIP and SAP tables
- Configuring IPX routing connections
- Configuring the Pipeline as a Bridge
- Defining Filters and Firewalls
- Setting Up Pipeline Security
- Pipeline System Administration
- Pipeline 75 Voice Features
- IDSL Implementations
- APP Server utility
- About the APP Server utility
- APP Server installation and setup
- Configuring the Pipeline to use the APP server
- Using App Server with Axent SecureNet
- Creating banner text for the password prompt
- Installing and using the UNIX APP Server
- Installing and using the APP Server utility for DO...
- Installing and using the APP Server utility for Wi...
- Installing APP Server on a Macintosh
- Troubleshooting
- Upgrading system software
- What you need to upgrade system software
- Displaying the software load name
- The upgrade procedure
- Untitled

Pipeline User’s Guide Preliminary January 30, 1998 E-1
E
Upgrading system software
This appendix includes the following topics:
Warning:
Do not “upgrade” to an older version of software. If you use an older
version of software with a new Pipeline, the unit will not function and you will
need to return it to Ascend for replacement.
What you need to upgrade system software
Ascend system software is continually being enhanced to support new features
and improve performance. The Pipeline is designed so that you can upgrade the
system software and take advantage of these new features without returning the
unit to the factory.
To upgrade the system software you need the following:
• The new system software. Contact the Ascend Technical Assistance Center
for upgraded software, as described at the front of this guide.
• TFTP server software, or access to it. TFTP is required when upgrading to a
fat or extended load, but can be used to upgrade to any size binary. You will
need to know the host name or IP address of the host running the TFTP
What you need to upgrade system software. . . . . . . . . . . . . . . . . . . . . . . . . E-1
Displaying the software load name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2
The upgrade procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3