User`s guide

ManualsBrandsAscend ManualsComputer equipmentPipeline

Table Of Contents

Ascend Customer Service
How to use this guide
What you should know
Documentation conventions
How to use the on-board software
- Changing parameter values
- Saving or discarding your changes
Manual set
Configuring WAN Connections
- About Wide Area Network (WAN) connections
- Link encapsulation
- Nailed groups
- How calls are initiated
- How calls are answered
- Data compression options
- The Answer profile
- Connection profiles
- Configuring Frame Relay connections
Configuring IP Routing
- Introduction to IP routing on the Pipeline
- Managing the routing table
- Configuring IP routing connections
- Ascend Tunnel Management Protocol (ATMP)
IP Address Management
- Connecting to a local IP network
- BOOTP Relay
- DHCP services
  - How IP addresses are assigned
  - Configuring DHCP services
- Dial-in user DNS server assignments
  - Configuring DNS servers in the Ethernet profile
  - Configuring DNS servers in the Connection profile
- Local DNS host address table
- Network Address Translation (NAT) for a LAN
Configuring IPX Routing
- How the Pipeline performs IPX routing
- Adding the Pipeline to the local IPX network
- Working with the RIP and SAP tables
- Configuring IPX routing connections
Configuring the Pipeline as a Bridge
- Introduction to Ascend bridging
- Enabling bridging
- Managing the bridge table
- Configuring bridged connections
Defining Filters and Firewalls
- Introduction to filters
- Overview of Filter profiles
- Example filters
- Working with predefined call filters
- Display unwanted dial-out packets
- Secure Access Firewalls
- Filter persistence
  - Background on firewall and filter persistence
  - Filter persistence and Connection profiles
Setting Up Pipeline Security
- Recommended security measures
- Pipeline Security profiles
- Connection security
- Using filters to secure the network
- Using security cards
Pipeline System Administration
- Overview of administration functions
- Activating administrative privileges
- Configuring administration options
- Using the Pipeline status windows
- Performing system administration operations
- Using the terminal server interface
  - Invoking and quitting the terminal server interfac...
  - Terminal server commands
- Accessing a local Pipeline via Telnet
Pipeline 75 Voice Features
- About the integrated services of ISDN
- How your ISDN service affects voice features
  - Ordering supplementary voice services
  - Ordering voice features
- How outgoing voice calls are handled
- How incoming voice calls are handled
- Support for 2-channel calls on one SPID
  - Configuring a 2-channel, single SPID call
- Support for outgoing 3.1K audio calls
  - How 3.1K audio calls work
  - Configuring 3.1K audio call
- EAZ Terminal ID for Germany
IDSL Implementations
- ISDN Digital Subscriber Line (IDSL)
- Configuring an IDSL connection
- Making voice calls over IDSL
APP Server utility
- About the APP Server utility
- APP Server installation and setup
Troubleshooting
- Cabling problems: Rule these out first
- Common problems and their solutions
- Problems configuring the Pipeline
- ISDN BRI interface problems
  - Bridge/router problems
- Problems accessing the remote network
  - Check the installation
  - Configuration problems
Upgrading system software
- What you need to upgrade system software
- Displaying the software load name
- The upgrade procedure
Untitled

Configuring WAN Connections

The Answer profile

1-8 Preliminary January 30, 1998 Pipeline User’s Guide

PPP options...

Session options...

To require a matching profile for incoming calls, set Profile Reqd=Yes.

This prevents the Pipeline from building a connection on the basis of

parameters in the Answer profile.

If appropriate, set Id Auth=Required.

Some connection types do not provide an authentication method. If you plan

to allow those types of calls, you might need to use Id Auth (calling line ID).

(For more information, see Chapter 7, “Setting Up Pipeline Security.”)

Next, set options for PPP and MP+ calls:

Open the PPP Options submenu.

Route IP=Yes

Route IPX=Yes

Bridge=Yes

Recv Auth=Either

MRU=1524

LQM=No

LQM Min=600

LQM Max=600

Link Comp=Stac

VJ Comp=Yes

Dyn Alg=Quadratic

Sec History=15

Add Pers=5

Sub Pers=10

Min Ch Count=1

Max Ch Count=1

Target Util=70

Idle Pct=0

Turn on routing and bridging for the connection as appropriate.

For example: