User`s guide

ManualsBrandsAscend ManualsComputer equipmentPipeline

181

182

183

184

185

186

187

188

189

190

Table Of Contents

Ascend Customer Service
How to use this guide
What you should know
Documentation conventions
How to use the on-board software
- Changing parameter values
- Saving or discarding your changes
Manual set
Configuring WAN Connections
- About Wide Area Network (WAN) connections
- Link encapsulation
- Nailed groups
- How calls are initiated
- How calls are answered
- Data compression options
- The Answer profile
- Connection profiles
- Configuring Frame Relay connections
Configuring IP Routing
- Introduction to IP routing on the Pipeline
- Managing the routing table
- Configuring IP routing connections
- Ascend Tunnel Management Protocol (ATMP)
IP Address Management
- Connecting to a local IP network
- BOOTP Relay
- DHCP services
  - How IP addresses are assigned
  - Configuring DHCP services
- Dial-in user DNS server assignments
  - Configuring DNS servers in the Ethernet profile
  - Configuring DNS servers in the Connection profile
- Local DNS host address table
- Network Address Translation (NAT) for a LAN
Configuring IPX Routing
- How the Pipeline performs IPX routing
- Adding the Pipeline to the local IPX network
- Working with the RIP and SAP tables
- Configuring IPX routing connections
Configuring the Pipeline as a Bridge
- Introduction to Ascend bridging
- Enabling bridging
- Managing the bridge table
- Configuring bridged connections
Defining Filters and Firewalls
- Introduction to filters
- Overview of Filter profiles
- Example filters
- Working with predefined call filters
- Display unwanted dial-out packets
- Secure Access Firewalls
- Filter persistence
  - Background on firewall and filter persistence
  - Filter persistence and Connection profiles
Setting Up Pipeline Security
- Recommended security measures
- Pipeline Security profiles
- Connection security
- Using filters to secure the network
- Using security cards
Pipeline System Administration
- Overview of administration functions
- Activating administrative privileges
- Configuring administration options
- Using the Pipeline status windows
- Performing system administration operations
- Using the terminal server interface
  - Invoking and quitting the terminal server interfac...
  - Terminal server commands
- Accessing a local Pipeline via Telnet
Pipeline 75 Voice Features
- About the integrated services of ISDN
- How your ISDN service affects voice features
  - Ordering supplementary voice services
  - Ordering voice features
- How outgoing voice calls are handled
- How incoming voice calls are handled
- Support for 2-channel calls on one SPID
  - Configuring a 2-channel, single SPID call
- Support for outgoing 3.1K audio calls
  - How 3.1K audio calls work
  - Configuring 3.1K audio call
- EAZ Terminal ID for Germany
IDSL Implementations
- ISDN Digital Subscriber Line (IDSL)
- Configuring an IDSL connection
- Making voice calls over IDSL
APP Server utility
- About the APP Server utility
- APP Server installation and setup
Troubleshooting
- Cabling problems: Rule these out first
- Common problems and their solutions
- Problems configuring the Pipeline
- ISDN BRI interface problems
  - Bridge/router problems
- Problems accessing the remote network
  - Check the installation
  - Configuration problems
Upgrading system software
- What you need to upgrade system software
- Displaying the software load name
- The upgrade procedure
Untitled

Defining Filters and Firewalls

Example filters

Pipeline User’s Guide Preliminary January 30, 1998 6-17

Open In filter 01.

In filter 01

>Valid=Yes

Type=IP

Generic...

IP...

IPX...

Set Valid=Yes and Type=IP, and then open the IP submenu.

Specify the following conditions:

Ip...

>Forward=No

Src Mask=255.255.255.192

Src Adrs=192.100.50.128

Dst Mask=0.0.0.0

Dst Adrs=0.0.0.0

Protocol=0

Src Port Cmp=None

Src Port #=N/A

Dst Port Cmp=None

Dst Port #=N/A

TCP Estab=N/A

These conditions specify the local net mask and IP address in the Src Mask

and Src Adrs fields. If an incoming packet has the local address, it will not

be forwarded onto the Ethernet.

Close the current Input filter, and then open In filter 02.

Set Valid=Yes and Type=IP, and then open the IP submenu and specify the

following conditions: