User`s guide

Configuring the WAN Interfaces
Testing T1 connections
MultiVoice Gateway for the MAX— User’s Guide Preliminary November 23, 1998 5-9
00-300 Security
00-400 Destinations
00-500 Dial Plan
2 Select Sys Diag.
The Sys Diag menu appears:
00-200 Sys Diag
>00-201 Restore Cfg
00-202 Save Config
00-203 Use MIF
00-204 Sys Reset
00-205 Term Serv
00-206 Upd Rem Cfg
3 Select Term Serv.
The Terminal Server screen appears:
** Ascend Pipeline Terminal Server **
ascend%
4 Type test phone-number
where phone-number is the phone number of the MultiVoice Gateway T1 line.
Note: The most frequent reason for failing to connect is an incorrect phone number.
5 If the test is unsuccessful, verify that you have entered all the T1 line parameters correctly
and that your line is correctly provisioned as explained in Appendix B, “Provisioning the
Switch.”
6 Enter quit to exit the terminal server interface.
7 Press the Left-Arrow or the Escape key to return to the Main Edit Menu.