User`s guide

Navigating the User Interface
Special display characters and keys
MultiVoice Gateway for the MAX— User’s Guide Preliminary November 23, 1998 4-9
Note: You always use the Control and Shift keys in combination with other keys. This
document represents key combinations as two characters separated by a hyphen, such as
Shift-T, which types the capital letter T. On the Palmtop Controller, the main character
associated with the key is large and white, and the Shift character associated with the key is
small and yellow.
When you can successfully navigate the VT100 interface, you are ready to configure the
MultiVoice Gateway.
< Left-Arrow, Ctrl-X, Ctrl-B Enumerated parameter: Select the previous
value.
String value: Move left one character or exit
the current input.
Menu: Close the current selection.
v Down-Arrow, Ctrl-N Move down to the next selection.
^ Up-Arrow, Ctrl-U, Ctrl-P Move up to the previous selection.
N/A Ctrl-V Move to the next page of the list.
N/A Tab, Ctrl-I Move to the next window.
Back-Tab, Ctrl-O Move to the previous window.
TOGGLE
STAT
N/A Toggle to a status menu from the edit menu
and vice versa.
Shift-> Delete Delete the character under the cursor.
Shift-< Backspace Delete the character to the left of the cursor.
Shift-^ none Overwrite the character under the cursor with
a space.
DO Ctrl-D Open the DO menu.
N/A Ctrl-T Return from or go to the Simplified Menus.
N/A Ctrl-L Refresh the VT100 screen.
N/A Ctrl-C Return from the MIF to the normal menus.
D D Dial the currently selected profile.
Table 4-1. Special keys for Palmtop Controller and Control Monitor displays (continued)
Palmtop
Controller
Control Monitor Operation