User`s guide

4-4 Preliminary November 23, 1998 MultiVoice Gateway for the MAX— User’s Guide
Navigating the User Interface
The Main Edit menu
Figure 4-4. Slot and port numbering in the MAX 2000 MultiVoice Gateway
The numbers in the VT100 menus relate to slot numbers in the MultiVoice Gateway unit,
which may be an actual expansion slot or a virtual slot on the MultiVoice Gateway unit’s
motherboard.
Common menu items
The system itself is assigned slot number 0 (menu 00-000) on the MAX 2000/4000/6000. The
System menu contains the following profiles and submenus, which are all related to
system-wide configuration and maintenance:
00-000 System
00-100 Sys Config
00-200 Sys Diag
00-300 Security
00-400 Destinations
00-500 Dial Plan
MAX 4000/6000 menu items
On the MAX 4000/6000 platforms, the menu numbers are associated with the following actual
expansion slots or virtual slots:
• The built-in T1 or E1 lines are slot 1 and slot 2 (menu 10-000 and 20-000). Each T1 or E1
slot contains two lines. The menus for configuring and testing the lines are organized as
follows:
10-000 Net/T1 (Net/E1)
10-100 Line Config
10-200 Line Diag
20-000 Net/T1 (Net/E1)
20-100 Line Config
20-200 Line Diag
• The six expansion slots are slots 3 through 8 (menus 30-000 through 80-000), with the
numbering shown in Figure 4-3.
• The Ethernet is slot 9 (menu 90-000). The Ethernet menu contains submenus and profiles
related to the local network, routing and bridging, and WAN connections.
• EtherData is slot A (menu A0-000). There is no menu for the EtherData slot.
• The serial WAN port is slot B (menu B0-000).