User`s guide

MultiVoice Gateway System Administration
Terminal-server commands
MultiVoice Gateway for the MAX— User’s Guide Preliminary November 23, 1998 10-21
Show Revision
The Show Revision command displays the software load and version number currently
running in the MultiVoice Gateway. For example:
ascend% show revision
techpubs-lab-17 system revision: ebiom.m40 5.0A
Show Users
To display the number of active sessions, enter the Show Users command. For example:
ascend% show users
I Session Line: Slot: Tx Rx Service Host User
O ID Chan Port Data Rate Type[mpID] Address Name
O 231849873 1:1 9:1 56K 56K MPP[1] 10.10.68.2 jdoe
I 231849874 1:3 3:1 28800 33600 Termsrv N/A Modem 3:1
O 214933581 1:2 9:2 56K 56K MPP[1] 10.10.4.9 arwp50
O 214933582 1:6 9:3 56K 56K MPP[1] MPP Bundle arwp50
The output contains the following fields:
Field Description
I/O Incoming call (I) or Outgoing call (O).
Session ID Unique session-ID. This is the same as Acct-Session-ID in RADIUS.
Line:Chan Line and channel on which the session is established.
Slot:Port Slot and port of the service being used by the session. Can indicate the
number of a slot containing a modem card and the modem on that card,
or the virtual slot of the MultiVoice Gateway unit’s bridge/router. If the
slot is virtual, the port number represents a virtual interface to the
bridge/router, starting with 1 for the first session of a multichannel
session.
Tx Data Rate Transmit rate in bits per second.
Rx Data Rate Receive rate in bits per second.
Service Type Type of session, which can be Termsrv or a protocol name.
For MP and MPP, this field shows the bundle ID shared by the calls in a
multichannel session. The special values Initial and Login
document the progress of a session. Initial identifies sessions that do
not yet have a protocol assigned. Login identifies Termsrv sessions
during the login process.
Host Address Network address of the host originating the session.
For some sessions this field is N/A. For outgoing MPP sessions, only the
first connection has a valid network address associated with it. All other
connections in the bundle have the network address listed as MPP
Bundle.