User`s guide

10-18 Preliminary November 23, 1998 MultiVoice Gateway for the MAX— User’s Guide
MultiVoice Gateway System Administration
Terminal-server commands
Show command
The Show command takes several arguments. The ? argument lists them:
ascend% show ?
Note: Many of the Show commands are specific to a particular type of usage, such as IP
routing or OSPF, and are described in the relevant chapter.
show ? Display help information
show arp Display the arp cache
show icmp Display ICMP information
show if Display Interface info. Type ‘show if ?’ for help
show ip Display IP information. Type 'show ip ?' for help.
show udp Display UDP information. Type 'show udp ?' for help
show igmp Display IGMP information. Type 'show igmp ?' for help.
show mrouting Display MROUTING information. Type 'show mrouting ?' f ?’
show ospf Display OSPF information. Type 'show ospf ?' for help.
show tcp Display TCP information. Type 'show tcp ?' for help
show dnstab Display local DNS table. Type ‘show dnstab ?’ for help
show netware Display IPX information. Type 'show netware ? ' for help
show isdn Display ISDN events. Type 'show isdn <line number’ for help
show fr Display Frame relay info. Type 'show fr ?' for help
show pools Display the assign address pools
show modems Display status of all modems
show calls Display status of calls
show pad Display X25/PAD information
show uptime Display system uptime
show revision Display system revision
show v.110s Display status of all v.110 cards
show users Display concise list of active users
show x25 Display status of X.25 stack