User`s guide

10-8 Preliminary November 23, 1998 MultiVoice Gateway for the MAX— User’s Guide
MultiVoice Gateway System Administration
Terminal-server commands
Returning to the VT100 menus
The following commands close the terminal-server command-line interface and return the
cursor to the VT100 menus.
quit Closes terminal server session
hangup " " " "
local Go to local mode
For example:
ascend% quit
local Go to local mode
remote remote <station> - This command is not supported on the MultiVoice
Gateway
set Set various items. Type ‘set ?’ for help
show Show various tables. Type ‘show ?’ for help
iproute Manage IP routes. Type ‘iproute ?’ for help
dnstab Displays help information about the DNS table. Type 'dnstab ?' for help
slip SLIP command - This command is not supported on the MultiVoice
Gateway
cslip Compressed SLIP command - This command is not supported on the
MultiVoice Gateway
ppp PPP command - - This command is not supported on the MultiVoice
Gateway
menu Host menu interface
telnet telnet [ -a|-b|-t ] <host-name> [ <port-number> ]
tcp tcp <host-name> <port-number>
ping ping <host-name>
ipxping ipxping <host-name> - This command is not supported on the MultiVoice
Gateway
traceroute Trace route to host. Type 'traceroute -?' for help
rlogin rlogin [ -l user -ec ] <host-name> [ -l user ]
open open < modem-number | slot:modem-on-slot > - This command is not
supported on the MultiVoice Gateway
resume resume virtual connect session - This command is not supported on the
MultiVoice Gateway
close close virtual connect session - This command is not supported on the
MultiVoice Gateway
kill terminate session - This command is not supported on the MultiVoice
Gateway