User`s guide

8-28 Preliminary November 23, 1998 MultiVoice Gateway for the MAX— User’s Guide
Configuring IP Routing
Managing IP routes and connections
24 DYN 10.65.212.87 0000813606A0 0 0 0 857666
25 DYN 10.65.212.235 00C07B76D119 0 0 0 857708
26 DYN 10.65.212.19 08002075806B 0 0 0 857929
The ARP table displays the following information:
• entry—A unique identifier for each ARP table entry.
• typ—How the address was learned, dynamically (DYN) or statically (STAT).
• ip address—The address contained in ARP requests.
• ether addr—The MAC address of the host with that IP address.
• if—The interface on which the MultiVoice Gateway received the ARP request.
• rtr—The next-hop router on the specified interface.
Displaying ICMP packet statistics
To display the numbers of ICMP packets received intact, received with errors, and transmitted,
enter the Show ICMP command. For example:
show icmp
3857661 packet received.
20 packets received with errors.
Input histogram: 15070
2758129 packets transmitted.
0 packets transmitted due to lack of resources.
Output histogram: 15218
The Input and Output histograms show the number of ICMP packets received and transmitted,
respectively:
Displaying interface statistics
To display the supported interface-statistics commands:
ascend% show if ?
show if ? Display help information
show if stats Display Interface Statistics
show if totals Display Interface Total counts
To display the status and packet count of each active WAN link and of as local and loopback
interfaces, enter the Show IF Stats command. For example:
ascend% show if stats
Interface Name Status Type Speed MTU InPackets Outpackets
ie0 ethernet Up 6 10000000 1500 107385 85384
wan0 Down 1 0 1500 0 0
wan1 Down 1 0 1500 0 0
wan2 Down 1 0 1500 0 0
wanidle0 Up 6 10000000 1500 0 0
lo0 loopback Up 24 10000000 1500 0 0