User`s guide

7-12 Preliminary November 23, 1998 MultiVoice Gateway for the MAX— User’s Guide
Configuring Frame Relay
Monitoring Frame Relay connections
DLCI=23
Circuit=Circuit-1
8 Close the second Connection profile.
Monitoring Frame Relay connections
The terminal-server command-line interface includes Show FR commands for monitoring
Frame Relay in the MultiVoice Gateway. To display the options, invoke the terminal-server
interface (System > Sys Diag > Term Serv) and then enter the Show FR command with the ?
option. For example:
ascend% show fr ?
show fr ? Display help information
show fr stats Display Frame Relay information
show fr lmi Display Frame Relay LMI information
show fr dlci [name] Display all DLCI information or just for [name]
show fr circuits Display the FR Circuit table
Displaying Frame Relay statistics
To display Frame Relay statistics, enter the Show FR command with the stats option. For
example:
ascend% show fr stats
Name Type Status Speed MTU InFrame OutFrame
fr1 DCE Down 64000 1532 0 1
fr1-temp DCE Up 64000 1532 0 1
fr1-temp-9 DCE Up 64000 1532 0 0
The output includes the following fields:
Field Description
Name Name of the Frame Relay profile associated with the interface.
Type Type of interface.
Status Status of the interface. Up means the interface is functional, but is not
necessarily handling an active call. Down means the interface is not functional.
Speed Data rate in bits per second.
MTU Maximum packet size allowed on the interface.
InFrame Number of frames the interface has received.
OutFrame Number of frames transmitted.