User Guide

20
WALL – MOUNTING
If you wish to wall-mount your base, you can follow the steps below. Be
careful that your base is not too far away from power socket and you do not
drill through any electrical wiring or cables.
Step 1: Drill three holes using the template provided in the next page.
Step 2: Insert three screws (not supplied) into the drill holes. Leave
approximately 3 mm between the screw head and the wall.
Step 3: Hook your base over the screws. Your base is now ready for use.
Note: Not drawn to scale. For dimensional reference only.
QUICK REFERENCE GUIDE
Action Description
To make a call
Press
Dial tone Enter number
Enter number Press
key
Redialing
Press
Last number dialed displayed
Phonebook Dialing
Press
Press “0” – “9” Press
Numbers Dial Press
to end call
Network Service
Press
the network service number dial
Service Centre
Press and hold “0” the service centre number dial
Storing a number
in phonebook
Enter number Press and hold
Press “0” –
“9” to select the phonebook location Press
Adjust speaker
volume (during a
call)
Press “Up” and “Down” key to adjust the speaker
volume.
Mute Call
Press “Mute” key
Program Ringer
Melody
Press and hold
Press 1 Press 1 to
5 to select melody Press
Program Flash
Duration
Press and hold
Press 3 Press 1 to
4 to select flash duration Press
Program User
Phone Number
Press and hold
Press 4 Press
to erase digit or enter new number Press