User Guide

19
Additional Features
Call Recording
External recording equipment can
be connected to the 2.5 mm
record jack on the base unit for
call recording.
Out of Range
During phone mode, the LED’s on
the POD flashes RED quickly and
the signal icon flashes when it is
too far from the base.
User should move closer to the
base so the call will not be
terminated.
When the POD is moved close
enough to the base, the LED’s
and the signal icon will stop
flashing automatically.
Paging
Press the PAGE button at the
base during Standby to locate the
POD.
The POD will ring until any key is
pressed or stop after 30 seconds
if no keys are pressed.
Additional Features
Low Battery
During standby, the battery icon
will become empty and starts
flashing when the battery is low.
During phone mode, the LED’s on
the POD flashes RED quickly
every minute and the empty
battery icon flashes when the
battery is low.