User Guide
18
Programming
Service Centre Number
• Press and hold PROGRAM key
during Standby.
• Press “6” to select service centre
number programming.
(The LCD displays the current
number if it has been
programmed; otherwise, a blank
screen shall be displayed )
• Press PROGRAM key to select
service centre number
programming.
(The current number flashes.)
• Press CLEAR key to erase the
digit of the current number one by
one. Press and hold CLEAR key
to erase the entire number.
• Enter new numbers.
• Press PROGRAM key to confirm
the editing.
• Press CLEAR key to exit.
Programming
Default Setting
• Press and hold PROGRAM key
during Standby.
• Press and hold “9” to return the
phone to default setting.
(The display will show
“888888888888888888”.)
• Press PROGRAM key to confirm
the selection.
• Press CLEAR key to exit.
• Refer to the default value section
for all factory settings.