User Guide

17
Programming
User Phone Number
• Press and hold PROGRAM key
during Standby.
• Press “4” to select user phone
number programming.
(The current number is displayed if
it has been programmed;
otherwise a blank screen will be
displayed.)
• Press PROGRAM key to select
phone number programming.
(The current number flashes.)
• Press CLEAR key to erase the
digit of the current number one by
one.
• Press and hold CLEAR key to
erase the entire number and enter
new numbers.
• Press PROGRAM key to confirm
the editing.
• Press CLEAR key to exit.
Programming
Network Services Number
• Press and hold PROGRAM key
during Standby.
• Press “5” to select network
services number programming.
(The LCD displays the current
number if available; otherwise a
blank screen will be displayed.)
• Press PROGRAM key to select
service number programming.
(The current number flashes.)
• Press CLEAR key to erase the
digit of the current number one by
one. Press and hold CLEAR key
to erase the entire number.
• Enter new numbers.
• Press PROGRAM key to confirm
the editing.
• Press CLEAR key to exit.