User's Manual
Table Of Contents
- 1 Important
- 2 Your VOIP251 Cordless Telephone
- 3 Getting Started
- 3.1 Requirements
- 3.2 Connecting your charger
- 3.3 Charging your handset
- 3.4 Positioning the base station
- 3.5 Checking the signal strength
- 3.6 Checking the battery level
- 3.7 Installing software
- 3.8 Setting up for the first time
- 3.9 Checking Skype connection status
- 3.10 Auto power off
- 3.11 What is standby mode?
- 3.12 Switching your handset on/off
- 4 Contact List
- 5 Call
- 6 Call Log
- 7 Conference Calls
- 8 Intercom
- 9 Call Transfer
- 10 Skype Tools
- 11 Setting Options
- 12 Advanced Settings
- 13 Emergency Management
- 14 Extra Features
- 15 Phone Settings
- 16 Text and Numbers
- 17 Appendix
- 18 Troubleshooting
- 21 Index
9
Your VOIP251 Cordless Telephone
1Belt clip
2 Battery compartment
Remove battery cover to replace batteries.
3Headset jack
Headset is sold separately.
2.4 The base station
1 USB cable
The length of the cable can be customized up
to a length of 0.9m.
Refer to the figure below.
2 Base indicator
Slow Blinking (0.5 second intervals):
Indicates that:
- a call is in progress, OR
- the handset is being paged, OR
- the base station is in registration mode.
Fast Blinking (0.1 second intervals):
Indicates that the phone is receiving a call.
Steady On:
Indicates that the base station is connected to
computer.
Cover release
The length of the USB cable can be customized up
to a length of 0.9m.
1 Squeeze the tabs together.
Lift off the back cover. Uncoil as much of the
cable as is needed.