User's Manual

18
Call
5.4 Rejecting a call
When a call comes in, you can reject the call by
pressing e.
5.5 Turning off the ringer
You can turn off the ringer for incoming calls.
Press and hold
# during standby mode or
when the phone is ringing. is displayed on
the screen. For details on the ringer setting,
see “Setting your handset’s ring volume” on
page 27.
5.6 During a call
This section describes the features that are
available during a call.
5.6.1 Holding and resuming a call
Press r to hold the call. ON HOLD and the
icon are displayed.
• Voice communication is paused.
Press
r again to resume the call.
• Voice communication is resumed.
Note
You are unable to hear the opposite party talking
when the call is put on hold.
5.6.2 Muting the microphone
The mute feature allows you to speak to
someone in the house privately.
Press
m during a call. MUTE and the icon
are displayed. The other party cannot hear
you, but you can still hear his voice.
Press
m again to un-mute the microphone.
You can now communicate with the caller.
5.6.3 Adjusting the earpiece volume
Press u or d to adjust the volume during a
call. There are 5 volume levels.
Tip
You can also adjust the earpiece volume from
your computer. See page 34.
5.6.4 Using the speaker
Press i during a call to turn the speaker on.
The icon is displayed. Press
i again to
turn the speaker off.
Tip
Adjust speaker volume. Press u or d during a
call to adjust the speaker volume.
5.6.5 Making additional calls
During a call, you can make other calls.
Press
s.
Select the contact you want to call.
Press
r. The call is made to the contact.
The previous call is put on hold and the
icon is displayed.
When the call is established, repeat steps 1-3
to make more calls. Other calls are put on
hold.
1
1
2
1
2
1
1
1
2
3
4