User's Manual

19
Programming
Network Services Number
• Press “5” to select network
services number programming.
(The LCD displays the current
number if available; otherwise a
blank screen will be displayed.)
• Press PROGRAM key to select
service number programming.
(The current number flashes.)
• Press CLEAR key to erase the
digit of the user phone number
one by one. Press and hold
CLEAR key to erase the entire
user phone number.
• Enter new numbers.
• Press PROGRAM key to confirm
the editing and press CLEAR key
to exit.
Programming
Service Centre Number
• Press “6” to select service center
number programming.
(The LCD displays the current
number if it has been
programmed; otherwise, a blank
screen shall be displayed )
• Press PROGRAM key to select
service centre number
programming.
(The current number flashes.)
• Press CLEAR key to erase the
digit of the user phone number
one by one. Press and hold
CLEAR key to erase the entire
user phone number.
• Enter new numbers.
• Press PROGRAM key to confirm
the editing and press CLEAR key
to exit.