User's Manual

Phonebook Dialing

Phonebook dialing allows you to call any phone numbers stored in

phonebook. Refer to the section of programming for how to store or edit the

phonebook numbers.

You can use traditional dialing or predialing to call phonebook numbers.

Use Traditional Dialing

• Press PHONE key to seize the

line and wait for dial tone.

• Press PHONEBOOK key.

• Press “0” – “9” to display the

selected phonebook record.

• The phone number cannot be

edited.

(After pressing the phonebook

record number, the selected

number will be dialed out

accordingly.)

• Call timer and talk time remaining

counter are displayed accordingly.

• Press PHONE key again to end

the call.

Phonebook Dialing

Note: If no phonebook record is selected after PHONEBOOK key has

been pressed,

i. Press CLEAR key to exit phonebook selection and to return to the call and

talk timers.

ii. Pressing “* “ , “#”, PHONEBOOK, and SERVICE keys will have no effect.

iii. Press MUTE key to mute the call.

iv. Press “UP” and “DOWN” keys to exit phonebook review and to adjust

speaker volume.

v. Press FLASH key to exit phonebook review and to send out flash signal.

vi. Press REDIAL key to exit phonebook review and to dial the last dialed

number if it is available.

vii.Exit from the phonebook selection after a while.