User's Manual

The Answering Machine
- 59 -
REMOTE ACCESS
You can operate your answering machine when you are away from home by
calling your phone from a touch tone phone and entering your 4-digit PIN code.
Activating/deactivating remote access
You can allow or block remote access to your answering machine.
1. Press .
2. Select Answer machine
Æ
Settings
Æ
Remote access. Press
OK
.
3. Select the new setting. Press
OK
. The setting is saved.
Accessing your answering machine remotely
1. Make a call to your home number from a touch tone phone.
2. Press
when the outgoing message starts playing.
3. Enter your PIN code. You now have access to your answering
machine, and new message(s) starts playing.
4. Press a key to carry out a function. See the Remote access
commands table below for a list of available functions.
NOTE:
Y
ou have 2 tries to enter the correct PIN code before your phone
hangs up.
NOTE: The remote access PIN code is the same as your system PIN.
To change your PIN, see Changing your PIN on page 50.
NOTE: When no message is playing, your phone will hang up
automatically if no key is pressed for 8 seconds.
The Answering Machine
- 60 -
Remote access commands
Key Function
1 Repeat current or play previous
message
2 Play messages
3 Skip to next message
6 Delete current message
7 Switch answering machine on
(not available during playback)
8 Stop message playback
9 Switch answering machine off
(not available during playback)