User's Manual

The System
- 51 -
CHANGING THE COUNTRY SETTING
This feature only applies to model(s) with multiple-country support.
You can change the country setting of your phone when you are using it in
another country. If your handset displays Welcome, refer to Greeting you with
“Welcome” on page 14.
1. Press
.
2. Select Advanced set
Æ
Country. Press
OK
.
3. Select the new setting. Press
OK
. The setting is saved.
RESTORING DEFAULT SETTINGS
You can reset your phone settings to the original factory settings.
1. Press .
2. Select Advanced set
Æ
Reset. Press OK . The handset displays a
confirmation request.
3. Press
OK
to confirm. All settings have been reset.
To see a list of default setting, see Default (pre-programmed) settings on page 61.
NOTE: The availability of this menu is dependent on your country.
NOTE: After reset, your handset’s power switches off. It will switch back
on in a few seconds after updating all the settings. All handsets return
to the Welcome screen afte
r
reset.
- 52 -
The Answering Machine
Your SE455 includes a telephone answering machines that records unanswered
calls when it is on. Once switched on, your answering machine is ready to be
used. By default, your answering machine is set to Answer and Record mode.
You can also access the machine remotely.
The LED message counter (two digits 7-segment display) on the base will show
the number of the messages when the answering machine is on.
--
Memory full
00
AA
Remote access
Recording
The 2-digit number shows:
- The volume level during adjustment, or
- The message number
(blink for new messages)
You can use the answering machine menu on the handset to change the settings
of the answering machine.
TURNING ON THE ANSWERING MACHINE
You can turn on the answering machine either through the base or the handset.
Through the handset, Through the base,
1. Press .
2. Select Answer machine
Æ
Answer
on/off. Press OK .
3. Select On. Press OK . The setting is
saved.
1. Press
to turn on the answering
machine during standby.
Once switched on, your answering machine will answer incoming calls after a
certain number of rings depending on the ring delay setting. See Setting the ring
delay on page 58.