User's Manual

Calling Features
- 41 -
1. Press .
2. Select Advanced set Æ Auto prefix. Press OK .
3. Enter the Detect number. Press
OK
.
4. Enter the Prefix number. (To enter a pause, press and hold
.)
Press OK . The setting is saved.
FIRST RING
This feature only applies to model(s) with first ring support.
If you have subscribed for Caller ID service with your service provider, your phone
can suppress the first ring before the Caller ID. After resetting, your phone will
automatically detect if Caller ID service is subscribed and start to suppress the
first ring. You can change this setting to suit your preference.
Turning first ring on/off
1. Press .
2. Select Advanced set
Æ
First ring. Press
OK
.
3. Select the new setting. Press OK . The setting is saved.
NOTE: Reset First Ring Status. To reset the first ring status, you can
reset the system from the Reset menu. See Restoring default settings
on page 51.
NOTE: Dialed Number. If the dialed number starts with
º
, # or P, the
handset will not do any reformatting.
NOTE: Empty Detect Number. If the user only sets the prefix number
and leaves the detect number empty, the prefix number will be added
to all outgoing calls.
- 42 -
Network Services
The network services feature allows you to listen to information provided by your
network provider. The availability of this feature is dependent of your country and
your subscription with the network provider. This information are stored by the
network rather than in your handset itself. Contact your network provider for more
information about this feature.
CALL FORWARD
This feature lets you forward your calls to another number. There are a few options:
Call forward: forward all incoming calls.
Callfwd busy: forward calls only when the line is busy.
Callfwd unans: forward calls only when they are not answered.
Activating call forward
1. Press .
2. Select Netw. services. Press OK .
3. Select the call forward options you want. Press OK to confirm.
4. Select Activate. Press OK .
5. Enter the number you want to forward your calls to. Press OK . A call
is made to the service centre.
Deactivating call forward
1. Press .
2. Select Netw. services. Press
OK
.
3. Select the call forward options you want. Press OK to confirm.
4. Select Deactivate. Press
OK
. A call is made to the service centre.
NOTE: Incorrect codes. Network services may not work if the incorrect
activation and/or deactivation codes are entered.