User's Manual
- 11 -
Getting Started
CONNECTING YOUR PHONE
1. Connect the output plug of the mains
adapter to the bottom of the base unit.
2. Connect the mains adapter to a
standard wall outlet.
3. Connect the telephone line cord to the
phone socket at the bottom of the
base unit and the wall phone socket.
CONNECTING YOUR CHARGER
* For multi
* For multi* For multi
* For multi-
--
-pack
pack pack
pack models
models models
models only
onlyonly
only
1. Connect the output plug of the mains
adapter to the bottom of the charger.
2. Connect the mains adapter to a
standard wall outlet.
Getting Started
- 12 -
WALL MOUNTING THE BASE
The charger is designed to support wall mounting. If you prefer to wall mount the
charger, follow the instructions below.
1. Remove the bracket from the back of
the base unit by pressing down the
two latches on the top of the bracket.
2. Turn the bracket upside down and
then re-insert the bracket to the back
of the base unit.
[Image to be added]
[Image to be added][Image to be added]
[Image to be added]
3. Insert screws (not included) into the
wall.
The recommended mounting screws
are Philips Pan Head Self-Tapping
Screws with diameter 4mm and length
20mm.
[Image to be added]
[Image to be added][Image to be added]
[Image to be added]
4. Align the mounting holes on the back
of the base with the screws on the
wall.
5. Slide the base down into place.
CAUTION: Other wall mounting methods are not recommended and may
damage the product.