User's Manual

- 10 -
Registering Your Handset
Registration allows communication between your base unit and handset(s).
If your handset cannot communicate with its base, you will not be able to
make any call or use some of the functions and features on the phone.
If your handset displays UNREGISTERED, follow the steps below to register
your handset.
1. Press
on the base for 4 seconds.
2. Press on the handset.
3. Press OK to select REGISTRATION.
4. Enter the system PIN (Pre-set: 0000). Press BACK to make
corrections.
5. Press OK .
6. Select the base number you want. A blinking digit indicates
that the base number is already being used. Your handset
starts searching for the base.
If registration is successful, the signal icon displays steadily along with
the handset name. The base assigns a handset number to your handset. It is
the digit displayed on the right margin of the screen.
If registration failed, repeat the above procedure.
NOTE: Your base can register up to 4 handsets.
NOTE: Your handset is already registered unless you have
bought an extra handset individually or you have de-registered