User's Manual

Environment and Safety
- 2 -
Environment and Safety
IMPORTANT
This product is not designed for making emergency telephone calls when
the power fails. Alternate arrangements should be made for access to
emergency services.
Power requirements
This product requires an electrical supply of 110-120 volts, single-phase
alternating current, excluding IT installations defined in standard UL 60950.
Handset Charger Adapter
Input: 120VAC 60Hz
Output: 6VDC 150mA
Base Unit Adapter
Input: 120VAC 60Hz
Output: 6VDC 300mA
Battery requirements
The handset requires power source of two rechargeable NiMH batteries,
size AAA 1.2V 650mAh (HR10/44).
Telephone connections
The voltage on the network is classified as TNV-3 (Telecommunication
Network Voltages, as defined in the standard UL 60950). Following a power
cut, the call in progress as well as the date and time settings will be lost.
Hearing aid
Please note that this telephone works by sending radio signals between the
base unit and the handset. These signals may interfere with some hearing
aids, causing a humming noise.
CAUTION: Use only the mains adapter supplied with this equipment. Incorrect
adapter polarity or voltage can seriously damage the unit.
CAUTION: The electrical network is classified as dangerous according to
criteria in the standard UL 60950. The only way to power down this product is
by unplugging the power supply from the electrical outlet. Ensure the
electrical outlet is located close to the apparatus and is always easily
accessible
WARNING: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Never use non-rechargeable batteries. Use recommended type supplied with
this product. NiMH batteries must be disposed of in accordance with the
applicable waste disposal regulations.