User's Manual

Calling Features
- 26 -
Selecting recall duration
1. Press .
2. Select ADVANCED SET  RECALL TIME. Press OK .
3. Select the new setting.
4. Press OK . The new setting is saved.
AREA CODE REMOVAL
The area code feature automatically removes an area code of an incoming
call. You can define an area code you want to remove. The phone number
will be saved in the call log without the area code.
Activating the area code
1. Press .
2. Select ADVANCED SET  AREA CODE. Press OK .
3. Enter the area code (any digit between 0-9).
4. Press OK when finished. The new setting is saved.
Deactivating the area code
1. Press .
2. Select ADVANCED SET  AREA CODE. Press OK .
3. Use BACK to delete all the digits.
4. Press OK when finished. The new setting is saved.
CID PREFIX
This section only applies to model(s) with CID Prefix support.
Some telephone providers send a CID prefix along with the CallerID. Consult
your service provider on category number handling.
To call back from the history properly, change setting to ON if your
telephone service provider sends out a CID prefix, or change setting to OFF
if the CID prefix is not sent.
Setting category number
1. Press .
2. Select ADVANCED  CID PREFIX. Press OK .
3. Select the new setting.
4. Press OK . The new setting is saved.