User's Manual

8 of 12
• Press . Use or button to scroll until Temperature
is displayed.
• The current temperature is also displayed.
• Press .
• Use or to scroll until Range is displayed.
• Press . The minimum temperature setting is displayed.
• Use or to select the minimum temperature.
• Press to confirm. Saved is displayed for 2 seconds.
• The maximum temperature setting is displayed.
• Use or button to scroll and select the maximum
temperature for the room.
• Press . The display reads Saved and then returns to
Temperature menu.
• Press to exit.
Note: If the temperature goes beyond the minimum or maximum level,
“Low” or “High” indication displays and the current temperature
flashes in the displays of both Units. If the Temperature alert is
set to On, an alert will be sound at the Parent Unit. The alert
sound will goes off automatically when the temperature falls
within the pre-set range.
If the Temperature falls below 7°C (44°F) or rises above 33°C
(91°F), -- will be flashing on the 7-segment.
Setting the Temperature Alert
• Press . Use or button to scroll until Temperature
is displayed.
• The current temperature will also display.
• Press . Use or button to scroll until Alert On/Off
is displayed.
• Press .
• If current temperature alert is off, Alert On? is displayed.
• If current temperature alert is on, Alert Off? is displayed.
• Press to confirm. Saved is displayed and then returns to
Temperature menu.
• Press to exit.
Note: Pressing any button can suppress the alert until temperature
goes beyond further 2 degrees.
Setting the Temperature Unit
You can choose degree Celsius(°C) or degree Fahrenheit((°F) for
temperature display.
• Press . Use or button to scroll until Temperature
is displayed.
• The current temperature is also displayed.
• Press .
• Use or to scroll until Unit is displayed.
• Press .
• Use or to select degree Celsius(°C) or degree
Fahrenheit((°F) for temperature display.
• Press to confirm. Saved is displayed and then returns to
Temperature menu.
• Press to exit.
Note: Whenever the temperature unit has been changed, the
minimum and maximum temperature range settings will be
reset to their default values.