User's Manual

10 of 12
• Press to pause. Paused is displayed and the icon
flashes on both units.
• Press will resume the lullaby play.
• If lullaby play is not resumed within 60 seconds, lullaby will stop
automatically.
Stopping the Lullaby Playing
Baby Unit
When lullaby is playing,
• Press will stop the lullaby play. The icon displayed on
both units will turn off.
Parent Unit
When lullaby is playing,
• Press . The display shows StopLullaby?.
• Press will stop the lullaby play. The icon displayed on
both units will turn off.
You can also stop the lullaby playing from the Lullaby menu.
• Press . The display shows StopLullaby?.
• Use or button to scroll until Lullaby is displayed.
• Press . The display will read Stop?
• Press to stop the lullaby playing.
Out of Range
When the baby and parent units have no link with each other (eg. Out
of range, parent unit or Baby unit is not powered on), the green Link
LED flashes. If there is no link for more than 30 seconds, Not Linked
will be displayed on both units. The link break alert will also be emitted
from the speaker of the Parent Unit every 30 seconds. The red Link
LED will flash. When the units are linked, the green Link LED will be
steadily lit.
Note: Link break alert cannot be manually set on or off, but it can be
suppressed for 3 minutes by pressing any button.
There is only visual alert shown on the Baby Unit.
Low Battery
Baby Unit
When the unit is running on battery power and reaches low battery
level, the display will show Low Battery and the battery icon flashes.
Once the low battery level is reach, the baby unit should still be able to
operate for an hour.
Parent Unit
When the batteries on the Parent Unit reach a low level, the display will
show Low Battery and the battery icon flashes. The low battery alert
tone will be emitted from the speaker every 60 seconds. Once the low
battery level is reached, the parent unit should still be able to operate
for an hour. The low battery alert message and alert tone will be turned
off when fully charged batteries are being replaced.
Note: Low battery alert can be suppressed by pressing any button.
Charging the Battery
Place the parent unit on its charge cradle to charge the battery. When
charging, the red LED on the charger will light steadily. The bars in the
battery icon on the Parent Unit will scroll. When the battery is full, the
battery icon shows three bars and stop scrolling.
Note: The Parent Unit must never be operated on the charging cradle
without batteries.