User's Manual

To turn off baby call,
1. Press the
CANCEL
soft key
.
2. Press
OK
to confirm.
3.13.
Multi-handset capabilities
Note: You need at least 2 handsets to carry out the functions mentioned in this section
3.13.1
Registering
Register a new handset to base station
Each base can register up to 4 handsets.
1. Press MENU.
2. Press UP or DOWN
to select SYSTEM and press OK.
3. Press UP or DOWN
to select REGISTER and press OK.
4. Press and hold the
key on the base for 4 seconds.
De-register handset from a base station
A handset can un-register another handset registered to the same base. It can also un-register
itself.
1. Press MENU.
2. Press UP or DOWN
to select SYSTEM and press OK.
3. Press UP or DOWN
to select DELETE HS and press OK.
4. Press UP or DOWN
to select the handset you would like to un-register and press OK.
5. Press OK again to confirm.
Select the base station
If your handset is registered to more than one base, you can select which base the handset will
use.
1. Press MENU.
2. Press
UP
or
DOWN
to select SYSTEM and press
OK
.
3. Press UP or DOWN
to select BASE SELECT and press OK.
The base is full
If the base is full, the base would not go into registration mode. See the section of de-register
handset from a base station to delete a currently registered handset.
4. Press UP or DOWN
to select the base to use and press OK.
3.13.2
Using multiple handsets
Note:
You need at least 2 handsets to carry out the functions mentioned in this section
Make an internal call
You can call someone in the house by using the intercom function on your phone.
To make an intercom call:
1. Press INT soft key.
2. Select the handset you want to call and press OK OR press the number of the handset
that you want to call.
Make an internal call during an external call
While you are on an outside call, you can put the outside call on hold and make a call (inquiry
call) to someone in the house.
To make an inquiry call, during an outside call:
1. Press OPTIONS.
2. Press UP or DOWN
to select INTERCOM and press OK.
3. Press
UP
or
DOWN
to select the handset you want to call and press
OK
OR press
the number of the handset that you want to call.
4. Wait for the other handset to answer your call.
Transfer an external call to another handset
Make an internal call During a Telephone call,
1. Press OPTIONS, select INTERCOM and press OK.
2. Press
UP
or
DOWN
to select the handset you want to call and press
OK
OR press
the number of the handset that you want to call.
3. Wait for the other handset to answer your call.
4. When the other handset has answered your call, press EXIT
or place the
handset on cradle. The external call is transferred.
Or
4. When the other handset has answered your call, press
OPTIONS
, select TRANSFER
and press OK.
Note: You will hear a bus
y
tone if the other handset is not available.
Note: To return to the external call, press OPTIONS and select EXIT CONF. option and press
OK.