User`s manual

CH 3 How to Use
6) PTZ
Configure Pan/Tilt/Zoom camera for control via DVR System and Remote clien
t
Driver: Choose Driver to be suitable for PAN/TILT Camera manufacturer.
You have to set Comport value according to the connected camera. There are
more kinds of camera which can be supported. Please contact the tech support
to want to know the other cameras
to
want
to
know
the
other
cameras
.
Baudrate
PELCO D type 9600~2400
PELCO P type 2400
PANASONIC 2400~19200
ORIENTAL 2400(Fixed)
LPT-A100L 9600(Fixed)
LG-SD110 2400~19200
* For connection of PAN/TILT Camera Receiver part, refer to user's manual of the
related PAN/TILT Camera.
7) Controller
This sets the ID of remote control. If you have many DVRs in the same place, you
can control separately the DVR by different remote control ID.
Use the ID setup and number key to set the ID of remote control on the remote
controller. You may check the ID by pressing the remote control key. The ID should
39
b
e the same between the DVR and remote control.