User`s manual
CH 1 Product Introduction
[Rear Panel]
11.AUDIO
OUT
8.RELAY
7.RS485
10. AUDIO IN
9.SENSOR IN
1.FAN
2.VIDEO IN
3. LAN
4.SPOT
5. VGA
12.HDMI
6. POWER
13.Xbox
Extender
(option)
1. Cooling Fan
2. Video In: This receives images from SDI cameras.
3. LAN Port: This is the Gigabit Ethernet LAN cable connection terminal.
4. SPOT Out : To CRT 4:3 monitor for spot video.
5. VGA port: video output for analog RGB display
6. DC Power : DC12V 4.0A or up
7. RS485 port : For control the pan and tile cameras. Make sure that the polarity.
8. Relay out : This terminal blocks connect external electric devices to the product
( Warning Lamp and others).
9. Sensor In : This terminals can be connected to external sensors.
10. Audio In: RCA audio in terminals. You can record four channels at the same
time.
11. Audio Out: RCA audio out terminal.
12. HDMI : HDMI output for HD monitor
13. Xbox Extender (option) : Connect to xbox for VGA and USB extention with
FTP cable (Refer to Appendix A)
10
※
For more details, refer to [CH 2. Installation Method and Cautions].