Instruction manual

70
① Copy the firmware on USB and connect on the
USBA (Up) port.
※ The USB should be connected on USB A (Up)
port otherwise can not upgrade.
② For upgrade, restart the DVR.
③ After restart, when upgrade window is appeared,
select the START button.
⑤ After upgrade, remove the USB and select OK button.
Then DVR is restarted.
※ If select OK button without removing USB,
DVR upgrade is started again after restart.
⑥ After restart DVR, can check that upgrade is finished.
Memory Stick
8. APPENDIX
8.1 Firmware Upgrade