Instruction manual

11
※ STATUS LED
Recording LED
Recording LED is turned on when DVR is recording.
Network LED
Network LED is turned on when DVR is connected by network
※ Front Button
The front panel of DVR is similar as normal VCR or Multiplexer and the functions are also similar .
Front buttons have various functions and are used for DVR initial setting and others.
Please refer to the below explanation.
NUMBER buttons (0 ~ 9)
Displayed selected camera number to full screen.
And also these buttons are used to enter a password.
NOTE: If user want to use over than 10 channel, use the +10 button.
Ex) 10 + 1 = 11, 10 + 6 = 16
DISPLAY button
Display split screens 1, 4, 7, 9, 10, 13, 16.
REC button
Start recording when this button is pressed in live mode.
MENU button
Enter Setup menu. User need to Admin access permission.
Return to previous screen if this button is pressed again.
ESC button
Exit current screen or return to previous screen.
ROTATE button (Preset)
Display next channel if this button is pressed.
In PTZ mode, It is used Preset function button.
.