Installation guide

Page 12
Installing the NetStacker Chassis
Mounting a Single Hub
or a Hub Stack on a
Rack
To mount a NetStacker Hub or a stack of NetStacker hubs on a rack:
1
Mark the desired location on the rack for the single
hub or the stack.
2
Fasten the brackets to the hub(s), using two of the
four screws provided in the package.
3
With a single hub, fasten the hub to the rack.
With a stack of hubs, first fasten the Base Hub to the
rack (ask an assistant to hold it in place if necessary)
using the other two screws provided in the package.
4
Mount the first Expansion Hub on top of the Base
Hub (see page 10) and fasten the hub to the rack.
5
If you have a second Expansion Hub, mount it on top
of the first Expansion Hub and fasten it to the rack.
Figure 6 shows a three-hub stack mounted on a rack.
Figure 6 Rack-Mounting the Chassis
NetStacker 
Base Hub
NetStacker 
Base Hub
NetStacker 
Base Hub
SEG1
SEG 0
910111256781234
SEG1
SEG 0
P ARTITION
1234 5678 9101112
UPLINK 0
AUI
P ARTITION
1234 5678 9101112
UPLINK 0
AUI
L INK/ R ECEIVE
NetStacker-RJ21
910111256781234