Installation guide

Page 22
NetStacker NMM Lite Installation Guide
Using AsantéTerm AsantéTerm, provided with AsantéView and AsantéView Lite
In-Band and Out-of-Band, can be used to interrogate and program
a NetStacker hub using a Macintosh computer as a terminal.
Before using AsantéTerm, you need to configure the NMM Lite as a
local management port to gain terminal access to the NetStacker
hub. See "Using the Local Management Port" on page 17 for
instructions.
Installing AsantéTerm Follow this procedure to install AsantéTerm on a Macintosh hard
drive.
1
Insert the AsantéView disk into the floppy drive and
double-click the disk icon to open it.
2
Copy the AsantéTerm program to your hard drive. The
icon looks like the one shown in Figure 11.
Figure 11 AsantéTerm Icon
Running AsantéTerm To start AsantéTerm, use the following procedure.
1
Double-click the AsantéTerm icon.
AsantéTerm opens the terminal window. There may
not be any data displayed in the window when it
opens.
2
Press return to start communication with the hub.
∆ If text does not appear on the screen, press the
Reset button on the NMM Lite back panel. Diag-
nostic messages will appear before the screen
shown in Figure 12 on page 23.