Installation guide

Page 3
Grounding Yourself
You manage the RJ45B Module from a network management sta-
tion using AsantéView Lite In-Band and/or Out-of-Band (or
AsantéView). All 24 ports on the RJ45B Module are on Segment
1 and cannot be switched to Segment 2. For segment switching
capability in a NetStacker stack, use the full-size AH2072 NMM.
Installing the
RJ45B Module
To install the RJ45B Module, you will perform the following
operations:
❏ Ground yourself
❏ Check the package contents
❏ Install the module and check the LEDs
❏ Connect the module to other devices
Instructions for installing a recessed Asanté Mini MAU are
included.
If you are using an NMM Lite daughter board, you must install
the daughter board before you install the RJ45B module in the
NetStacker chassis. Refer to the NMM Lite Installation Guide for
instructions.
Grounding Yourself Before you unpack or handle the module, you must attach the pro
-
vided grounding strap to your wrist and then touch the mount
rack or a piece of metal to discharge static electricity from your
body or clothes. Make sure the chassis is already grounded.
Checking Package
Contents
The Asanté RJ45B package contains the following items:
❏
Asanté RJ45B Module in antistatic packaging
❏
Installation guide (this manual)
❏
Warranty card
Required Tool
We recommend you use a #1 slot screwdriver to tighten the mod
-
ule to the chassis. You can also hand-tighten the module.