Product specifications

Version 3.3.4 Release Note Addendum

10. Select the “Yes, I want to uninstall this device” option.

11. Click Next. The device uninstalls in approximately 30 seconds and the

Add/Remove Hardware Wizard closes.

12. Reboot the PortServer system or Ethernet client.

To install the Alacritech Ethernet adapter board driver:

1. Log in to the PortServer system or Ethernet client. The Found New

Hardware Wizard opens.

2. Click Cancel. The Found New Hardware Wizard closes.

3. Insert the MediaNetwork CD-ROM into the PortServer, or Ethernet

client CD-ROM drive. The CD-ROM is set to auto-start and open the

Avid Unity Installation window. This takes approximately 30 seconds.

4. Click Exit to close the Avid Unity Installation window.

5. On the MN_3.3.4 CD-ROM, navigate to:

Drivers_Firmware\NetworkAdapters\Alacritech\w2k_Xp

6. Double-click the setup or setup.exe icon. The Alacritech Accelerator

Setup window opens.

7. Make sure the Port Aggregation Driver option is not selected, and the

TCP Fast-path driver option and the Slicuser Diagnostic Utility option

are selected.

8. Click Continue. The Installing dialog box opens followed by the

Reinstalling Driver dialog box informing you that the SLIC adapter is

not currently configured.

9. Click Yes. The driver installs and the Setup Program dialog box opens

instructing you to restart the PortServer system.

10. Click Yes. The PortServer system or Ethernet client reboots.