User`s manual

Asanté IntraCore 65120

The console port is used to connect with a terminal using a DB-9

female connector. The setting is 9600-N81. See Table 2-2 for a list

of pinouts.

2.10.2 Gigabit Ethernet Ports Cabling Procedures

Cabling requirements for the Gigabit Ethernet modules depend on

the type of GBIC interface that has been installed. Use the following

guidelines to determine the cabling requirements for your GBIC:

• 1000BaseSX GBIC: Cables with SC-type fiber connectors;

62.5-micron multimode fiber (MMF) media up to 275 meters

(902 feet) long, or 50-micron MMF media up to 550 meters

(1805 feet) long

• 1000BaseLX GBIC: Cables with SC-type fiber connectors;

10-micron single mode fiber media up to 5 kilometers

(16,405 feet) long

• 1000BaseLX Long Haul GBIC: Cables with SC-type fiber

connectors; 10-micron single mode fiber media up to 100

kilometers (328,100 feet) long

• 1000BaseT: Category 5 or better Unshielded Twisted Pair

(UTP) cable to a distance of 100 meters (328.1 feet)

Pin Number Signal Name

1 CD Carrier Detect

2 RD Receive Data

3 TD Transmit Data

4 DTR Data Terminal Ready

5 SG Signal Ground

6 DSR Data Set Ready

7 RTS Request to Send

8 CD Carrier Detect

9 RI Ring Indicator

Table 2-2